I replaced my factory intrusion beams with high clearance ones, but I still have the rubbing on a sharp turn with any incline. The only thing I can do is remove the rear beams altogether to get it to clear 100% of the time.
I will likely remove the high clearance beams when I go off-roading...
2. BFG All-Terrain KO2 285/70R17
3. Black Rhino Armory 17x9.5 +6 Offset
4. Fox 2.0 Leveling kit, set to 2”. No spacers.
5. Installed ReadyLift high clearance intrusion beams. Cut carpet above rear intrusion beam. Rubbing on full compression while turning sharply
I think I may have to remove the...
Aloha Benny,
I would like a code for the following items:
2x - W714647-S450B
2x - W520201-S450B
Should be bolts and nuts for the engine cover (a friend gave me an extra cover they had but no hardware).
Shipping to Hawaii.
Thanks!
Good news, sort of, there are simply round nuts that press up against the aluminum. They had blue lock tight to keep them from slipping, when tightened or loosened. I guess mine was glued off center.
I opened the access panel in the tailgate but the middle cross member will prevent any access...
Hey all,
snapped a pic, can’t really see the other side but there is a tac welded nut behind the metal of the tailgate that the black screw threads into. One was slightly off center (one on the right) causing it to cross thread, which is funny because the stock screw was installed in that same...
I am writing this looking for any idea on how to fix my issue.
While installing my damper I noticed one of the threads in the tailgate was off center. I figured it would be fine since that’s how it was shipped from the factory, but once I threaded the new screw in, the thread broke free from...
I am writing this looking for any idea on how to fix my issue.
While installing my damper I noticed one of the threads in the tailgate was off center. I figured it would be fine since that’s how it was shipped from the factory, but once I threaded the new screw in, the thread broke free from...
Hey guys,
Just figured I would share my experience with running both the Ford drop in liner with a spray in liner underneath. Everything fits great!
I still get the benefits of the deep board channels while not having to worry about the chaffing under the drop in liner.
If anyone is...
If you are a Costco member, I highly recommend the Costco Auto Program. Generally speaking you will pay slightly more than Invoice price (what the dealer pays). This price is below MSRP.
I did this on the 10th, Sticker price for my XLT was $37,555, I paid $35,900.
If there are multiple...