If you haven't installed a tonneau cover on top of it, its a 5 min job at most with 2 people.
- Simply remove the 2 screws at the rear pillars, pull up from the middle, and snap up the bulkhead.
Here is a video of an install in an F150 as an example. Jump to the 3 min mark and you will see how...
Can't you refer to the FMVSS Certification sticker on the Drivers door pillar? By law it includes the vehicle build date. In the attached example, its 09/18.
Try keeping an eye out for "Take offs" on Ebay.. It's a long shot, but they usually sell for a decent price, since 2019 Ranger stock wheels are not listed as interchangeable with other vehicles.
I was able to pick up a set of 17 in OEM wheels (without TPMS) for $425 shipped to my door...
I have the Deuce 2 installed on my SuperCab Ranger and am very satisfied, and frequently use the front flip back. Previously I had one on my Nissan Frontier it still looked great even after 9 years of use parked outside.
For the 2019 Ranger, make sure it includes the bulkhead adapter and...
As Marcus notes, the 4/7 pin "sleeve" requires a little bit of massaging to install, but the wiring harness removal and installation is easy. Just drop the spare, unplug the main connector, remove the 2 license plate sockets, and unplug the 4 parking sensors and remove the "christmas tree"...
I contacted DeeZee directly and here is what I received for a response..
Hello,
Thank you for contacting Dee Zee! We are hoping to release our tailgate assist (DZ 43206) and other Dee Zee products for the Ford Ranger by the end of this summer. Please keep checking our website at...
I also researched Tapshot (Videokits creator), and found on their exec's LinkedIn page that Ford is a client.
I completed the survey and can confirm that they give you the Amazon e-gift card . I though it was a good opportunity to let Ford Marketing what I liked (and didn't) about the Ranger's...
Door Sill and Rocker Panel Armor - Black Textured, For SuperCrew
Part No: VKB3Z-1613208-B
======================================================================================
It looks like similar ones are available from Bushwacker for $199 with free shipping...
I have a small stone chip on the hood of my Lightning Blue and it looks to be a light grey primer.
I've ordered a paint touch up kit from Automotivetouchup.com and they spec a grey primer.
https://www.automotivetouchup.com/touch-up-paint/related-touch-up-half-oz/
Haven't got the kit yet to try...
According to Rock Auto (and cross referenced to parts.ford.com)
MOTORCRAFT BAGM94RH7800 Tested Tough Max; BCI Group: 94R
OE CCA: 800; OEM BCI Group: 94RH7
https://www.rockauto.com/en/catalog/ford,2019,ranger,2.3l+l4+turbocharged,3443244,electrical,battery,2476
Probably not the best option... The effort required to grind off the factory chain loops under the bumper and the drilling and alignment of holes in the bumper to bolt up this receiver, is much more work than just getting a Curt or DrawTite aftermarket hitch. Either of these hitches bolt...
My guess would be that they are locating holes for the factory to align the bumper to the frame.. Maybe a member with ties to the assembly plant can confirm (or correct me ! )
If you are towing a boat, the 4 pin connector should be fine as surge brakes are typically used (which don’t require a brake controller) if auxiliary brakes are needed / required by law...
I ran into the same issue when I cut out the opening to the outline in the bumper pad. I pulled out the bumper pad slightly and expanded the opening with a file until it just dropped in and snapped into the tabs on each side.