Search results

Do not know what to tell you I am traveling and not with my truck right now so cannot double check. As I said I if I timber correctly they all had cushions. All I know is they are quiet. Only thought I have is to make sure final torque is done with full weight on suspension. I loaded bed with...

Nice sunrise, and then a good day fishing with my son and his cousin. On the lake my nephew lives on near Mpls/St Paul.

Perfect I am sure you will be enjoying truck Oregon has a lot of nice areas from videos I have seen. I plan on making it there someday I have had mine on for almost 15k hard off road miles and there is no issue with squeaking. Fully loaded truck with a lot of weight on the back end. Also have...

Thanks, learned something new today. This forum is a great place.

Did not know that thanks for the update. So the transfer case and front differential gears are always turning?

Even if you do not offroad you should drive some in 4 wheel drive. Not good on the system to go unused. Just make sure you drive in a straight line and do not make any sharp turns unless you are on a dirt road were you can have wheel spin. I would think there is some info about this in the...

Please do not get offended, but looking closer at your truck I was going to say the flag on passenger side is backwards. Looking at a later picture I see you fixed it Thank You for that. It might have caused an issue for some people. The stars should always be leading.

That is when I wish my sliders had a large kick out section to protect that and the tires some.

Looks good like the color. I do not have a winch up front only steel bumper so that is the difference. Load up the back, put bigger tires on and you are all set.

Have a 2018 Forester with KO2 tires and full aluminum skid plates. Took that more places then I should have stuck a few times. With lots of digging and hand winching to get it out. Only real issue is CVT likes to heat up real quick, need to monitor it and let it cool down sometimes. Have the...

Wonder what you meant then I zoomed in on passenger window. Should have edited the photo ?

Not sure on the front measurements I have them, but traveling away from my truck. I have the Icons, started with option 3, because I am running around 600lbs all included. That was way too high went up like 3 inches. Changed to option 2, and went up around 2 then settled to about 1.5. If you...

Good way to look at it.

Do not have the tires or any comment on them. In 2021 Discount Tire/Americas Tire was giving a 10% discount for military, and online still shows 10% discount? Also if you have AAA they were doing $10 off per tire. Checking online they still have it, but some restrictions on locations.

Thanks, everyone has made valid points that is why it was a hard decision to make. For me with the mods, and the way dealers seem to lean I found it best to save the money and go without a ESP warranty. I do not have an aftermarket transmission plan, but going to do that soon when I change the...

Thanks for the advice, that is the best option just needed to hear it from someone else.

Cannot decide on getting the warranty or not. My issue is I have the Fox 2.5 suspension added. Set at 2.5 inch lift to level, Icon rear leafs, SVC billet UCA. I am running 285/65/18 KO2 E rated tires. Worried any power train claim would be denied. Truck has had no issues and runs great. Would...

This is a good video showing replacing coilovers by removing LCA at around the 4 minute mark. Does not go into detail, but you can see what is being done. I did mine this way only issue was putting back together need an extra set of hands to make it easier. Driver side did by myself and...

KO2’s are being discontinued, and they are changing over to KO3’s. Which by a few reviews are suppose to be a lot better. Not that anything is wrong with the original ones. I have had 2 sets on different vehicles, and loved them both times.

I have Method 316 18 x 9 +18 offset with KO2 285/65/18 and when I did the Fox 2.5 and placed reservoirs in the suggested position the hoses rubbed. I needed to move them in towards the center of the engine and forward as far as possible. On the drivers side I needed to rotate the position of the...