Search results

Mike got it installed today and it went in like it was meant to be there. Thanks for a great product. Was even able to suck fluid back out of the tube since I was about a 1/2 qt. high.

Received the dipstick on Monday but due to it being dark when I leave for work and return home look forward to the install this weekend. Will let you know how it goes.

Did this today and still can't get over how easy it was to turn it back to black. Looks like the day I bought it.

Know I voted yes but don't know if I posted I want one so put me on the list.

Uline sells mailing tubes by the box of so many. We use them where I work to send out rolled flyers. Kraft Heavy Duty Tubes in Stock - ULINE > However you ship them put me on the list for one.

So pan is replaced. Torqued to spec of 89 inch pounds and dipstick cap just so tight. Now to see if it leaks.

Changed my transmission pan today and I did use the ppe pan to make it easier next time. Lots of good information on here on how to do it and alot of good people to help if you run into a issue. I did use a new gasket for the pan, found it on line for 43 dollars.

Got the cap off. Actually went thru the passenger side wheel well. Popped a couple of push pins out and folded the flap back and it was straight on shot to the cap. Couple of quick turns on the rachet and it was lose. Got the pan switch just need to refill.

Called my dealer to do a pan drop and filter with fluid change and they wanted $770 to do it. Did offer to do a flush for $360 which I will never do.

Can hardly wait to see this dipstick. Got to be better than this.

Thanks, was also thinking about hitting it with some PB blaster to help loosen it.

Thanks, that is a start. Tried doing from the top but was to scared to turn to hard as it was not straight on.

Going to be replacing fluid, filter and pan this weekend. Can someone tell me how to get at the fill cap. Tried a couple of different approaches but could not get enough force on it to remove it. Just can not find a good angle for the wrenches.

Just installed one for my Nexar dash cam. Easy as can be and don't need to run a wire all the way down. Use one of the short adapter wires that they supply and it worked perfect.

Are you letting it sit for 15 minutes before you check it?

Had one die in my truck, had to take to the dealer to take everything apart to find the bastard. Now have screen over air inlet.

ARMY - Aug 1979 - Nov 1999. If I knew how much money I could make on the outside working less hours I would have got out after the 1st hitch.

I just went through this. First a nest on top of the battery a couple of times then a dead mouse in the vent, hell of a smell. 1k dollars later now I have put stainless steel screen over every opening into the cab. Stop them before it cost.

Well the dead mouse is gone. Dealer had to remove center console and seats plus pull dash out a little to get to it. Also found its nest under center console. They dropped the truck off last night at the house when they were done. Only thing I found wrong is they did not hook up the wires under...

Just a update. From the smell it is probably dead on top of the heater core. To get to it you have got to remove dash. Probably will cost 1500 dollars just in labor to do. Contacted my insurance and they will cover minus my deductible. Smell is getting better. Only bad when heater gets up to...