Search results

No problem! If you need me to take any more measurements just let me know. I’m very pleased with the quality of the Front Runner load bars. I can’t speak to any differences between the RSI ones, but the FR bars work and match perfect with the cap.

I just installed the 1165mm (45.9 in) bars from Front Runner. With the doors up there’s about another 3 inches of clearance on each side from the end of the bar to the door. Their 1255mm bars (49.4 in) should fit with the bars centered.

I need to contact RSI about this, but since I've had my Smartcap, my side window seals have both leaked. After a rain, there is always water on top of my wheel wells. Is this a know issue and is there a fix?

The front shocks can be adjusted down to keep the rake if you like, but it’s not simple. You need to compress the spring to release the tension on the adjustment nut. But yes, it’s possible to keep some of the rake, however it will no longer be lifted. You could install a rear block to lift the...

I don't have a Tremor, but have the Ford Fox Level and the same size tires as the Tremor. My mpg average driving 90% in slow stoplight traffic is a little over 15 mpg. Highway I get around 22.

It might just be location dependent if ATT doesn't have good service in your area. I took a 4000 mile road trip last summer with 2 of my kids who streamed two devices almost the whole time we were in the car. The service was shockingly reliable in all but remote areas.

Hi Benny! I’m about to order the FP Fog Lights and perhaps the Tremor flares. Do you have a code for these?

I see some complaining about the cost of RTR and comparing them to things like the knock-off "DOOD" grills. RTR at full retail is definitely expensive for what it is, but if I can play devil's advocate their quality is 1000% better than your typical Chinese made knockoff products like the Raptor...

War Damn Eagle! Auburn grad here in the Atlanta area (Marietta) as well. What part of Atlanta you from?

No problem! They are pretty easy to wire up, and bright for how tiny they are. The white ones would actually provide some pretty decent usable light for the bed or maybe to use in the wheel wells if that’s your thing. I tied mine in to the side marker lights, and have parking lights enabled as...

Off Amazon. I ordered the mesh first and measured the hole size. This is the one I ordered: Oznium Brightest Light Bolt - Flush Mount 12V LED Light for Bumper, Grille, Cars Interior, Dash, Ambient Lighting, Motorcycle w/Sleek Aluminum Housing & Screw Nut (6 mm Black, Amber LED)...

I have Builtright in the passenger side. Works great with no issues.

Where in Atlanta? I might be able to help you out.

Not sure exactly when mine arrived by boat. Mine has an August manufacturing date.

Just installed mine last weekend. Looks great! One issue that I see has been brought up before is that the supplied foam gasket that goes on the front bulkhead is not tall enough to fill the gap. There's like a 1/4in gap between the bed and cap at that spot. That can't be right. Did RSI send me...

Looks good with those slightly extended Tremor wheel flares. I'd still get something a little closer to flush, but those look a lot better than a regular Ranger on 0 offset. You'll definitely need a crash bar delete or aftermarket high clearance ones.

I did almost this exact swap. Had Ford Fox 2.0 on a 2019 XLT FX4 that I sold to Carvana. Bought a lightly used 2020 Lariat FX4. I swapped the 2019 XLT back to the stock FX4 suspension before I sold it, and then put the Fox 2.0 on the Lariat. I had some time to drive around the Lariat with the...

Carvana just listed my 2019 XLT FX4 with 9500 miles that I sold to them a couple of weeks ago. They paid me $35.2K and listed it for just under $38K. Will be interesting to see how long it stays available. Crazy if they can sell what's now almost a 2 year old truck for $2K under what it's full...

I just went from a 2019 XLT 302A to a 2020 Lariat 501A. The engine to me definitely seems quieter with the engine cover. I have kids, so the leather was a big upgrade for me. The cloth seats are more plush, while the leather is more firm. For longer trips the leather is better on my back, but...

I got basically the same for my 2019 XLT FX4 302A. I had around $5K+ in mods but was able to remove and transfer everything to a 2020 Lariat FX4 except for the bed liner. Fortunately I had kept all the stock parts to reinstall including the wheels, tires, and FX4 suspension.