help

I have a 2020 XLT and a few months ago the radio quit working and the radio controls dont do anything. Everything else still works, including the climate controls and settings, but not the radio buttons. I can still connect to bluetooth but nothing works. I also don't get any beeps whenever I...

So recently i had my ranger check engine light come on when i was driving and i scanned the OBD2 and it gave me the error code p0402. It says its EGR A Flow excessive detected. so I'm not sure that that means or how to fix it. any insight would be greatly helpful.

First time poster here! I've had my Ranger for a little over 2 years now and it's great, but I'm looking to get it leveled and I'm not sure where to start. I'm pretty new to car mods, so some of the finer details can get confusing. I had planned on potentially moving up to 33" tires after a...

Hey guys, Have a 2019 ranger, trying to get a tac hooked up but I can't figure out were to connect the green wire for the RPM. I have looked all around the internet and everyone says its a yellow/ tan wire, well not on 2019. I even took out the cluster and nope, its not there. So can anyone...

Hi what mk is a 69 2029 plate ford ranger wildtrak thanks

Hi all, I realize that this is way off-base, but I posted this problem to Google's "Help Communities" earlier this week and have gotten absolutely nothing; no surprises there. This is by far the most/only helpful forum that I've been a part of, so I'm throwing this out like a Hail Mary in the...

Hello everyone, this is my first time posting to the forum so I hope I’m doing it right, but anyway. My problem is as I was finishing installing my Eibach leveling kit, and BDS upper control arms I broke the 8mm bolt that mounts the UCA “shield” (as BDS refers to it in their instructions) on the...

I am curious how people run larger tires (33s-35s) without or with minimal rubbing. I am currently on 34s (285/75/17) and rub quite a bit with a 2" lift. It's mainly on the intrusion beam, and I even have a fabtech intrusion beam kit. Any tips for reducing rubbing? Fabtech Kit...

I recently got the DSS Rigid lights and the instructions are not good when it gets to the wiring. It comes with a switch but I’d would like to use the Tremor switches but not sure how to hook them up. Do I hook everything up to the battery? Where does that black box go? Is the negative hooked to...

So I installed the Morimoto XB headlights and realize I have a problem with the passenger side. When the headlights are turned on they work fine, but when the day runners are on the passenger side doesn’t come on. Also the passenger side blinker is glitchy. It’s super choppy instead of nice...

Hi everyone, I have a 2019 XLT that I've owned for a month. It's got a bunch of little issues that the Ford Dealer didn't want to help with so I'm hoping to get some advice from this group. #1 - Adaptive Cruise Control randomly stops after working fine for anywhere from 20 minutes to over an...

I’ve been wanting heated seats for a while now but I haven’t been able to find what parts I need to get it done. I’ve been looking through threads and groups and I can’t find anyone that’s done it. I’m assuming it’s more than just the pads and the FCIM. I’m assuming I’d need Forescan to enable...

I’m sure this has been ask more than once but for the life of me I can’t find any info on this specifically. I have a 2020 xlt fx4 4x4 ranger, I just got my 2.5in RC leveling kit on and I want to get bigger tires. I know most do 1 or 1.5spacers with 285/70/17 on factory wheels. But if I got...

I am looking for any insight on the aFe Quantum Pro Dry S vs the Roush Performance air intakes. I have found some short videos for the Roush and the metrics shown on the aFe site for the Quantum but no direct comparisons. I already have the Flowmaster FlowFX catback and want to make sure that...

On the box, it appears as though there are a ton of pieces (rubber, mostly) but on the inside. Nothing is there - unless everything is already installed in the spacer. Which mine looks like it is that way, but I can’t seem to take it apart. Am I missing an components?

Hi everyone I’m new here, love the forums so far, many thanks for all the advise I’ve seen so far! Love my first pickup! I’ve been scouring the forums to find what everyone has done to seal up the gaps in the back of the bed by the cab in the corners. I’ve tried putting a picture up so people...