Hello,
If you look in the write up you'll be looking for a grey wire at the plug behind the drivers kick panel. My truck did not have this wire so I jumped it with a fuse tap. Some have it some don't. The other wires were simple once I opened the dash area up. Getting the harnesses were the...
I'll do some more digging today. Hopefully I can find it. So close to being done. I was going to use a jump wire today to see if pulling from driver side rear defrost terminal. It's hot according to my test light.
Well, I was able to get the blinkers and puddle lights connected and working today. Just can't figure out why I do not have the grey wire where Mike tapped into for heat. Going to try and trace back the drivers side rear defrost wire and tap that if it works. Thank you Mike for the help and the...
You are AWESOME! Thank you so much. I will report back soon. I have both mirrors and door harnesses installed. As soon as I can break free I will dig into the wiring. Again, Thank you so much.
I messaged Mike. Hopefully it's something simple. If not no harm no foul. If I can/Can't get it to work then it will just help the next searching this mod out. :)
It's a great write up and will use it to dissect the new harness but if I can use the Lariat door harness and not have to tap wires to achieve the same thing isn't that worth the research? door harnesses are under $100.
I was in forscan yesterday to change my tire circumference and browsed around but didn't see anything for the mirrors/turn signals/puddles. I'm not that literate with forscan so I'm sure I could have missed it possibly.
Hello,
I was wondering is there's anyone out there who can help pinpoint my problem? I have swapped out my XLT power fold/bliss mirror for a Lariat mirror with puddle/power fold/heat and turn signal. I do have rear defrost and the fuse is there for heated mirrors. I can adjust and fold this new...