Search results

My '21 is a Lariat, but other than that it's your doppelgänger. Love the color!

They make a lot of money off people who forget about the automatic renewal following the one-year subscription. If those folks aren't paying attention to their credit card charges they can remain blissfully ignorant for many months. Thus, the dance.

Not my original post, but I used it as a template for installing the cabin air screens on my truck using 1/4" square hardware fabric. I supplemented the overlapping screen material with permanent, outdoor Gorilla Tape...

My objective for a mid-sized truck was primarily towing capacity. I actually had a '21 Colorado with the Duramax diesel on order early in the year. The 369 lb-ft of torque, superb fuel economy, and factory engine brake were the primary selling points. I ended up cancelling my order and having my...

My small town dealer here in the upper Midwest did the exact same thing. The door jamb sticker recommends 30 psi but the tires came out of the service bay at 36 psi. They're probably serviced too many F-150s and set 36 out of habit. I'm guessing it's simple lack of attention to detail.

https://www.ranger5g.com/forum/threads/check-your-air-box….15646/

For all around utility, the Subie was a better bargain too. Recent model year MINIs have higher build quality but you pay a premium for it.

2013 MINI Cooper Roadster

Sorry, no pics. My mod was pretty much the same as that done by jblc in a previous post in this thread so pics from me would not add value. I cut six small tabs in the overlapping material on each screen to bend over the lip of the opening to affix the screens. I supplemented the tabs with...

Just finished fabrication and installation of one screen for the engine intake out of 1/2" wire cloth (similar to prior examples in this thread) and two screens for the two cabin air intake holes out of 1/4" wire cloth. Given the possibility of food items being left in the cab, I wanted more...

Definitely the same as mine. Even the bar code is identical.

Good job. I thought about the same top location but to the left of the steering column centerline. I am similarly afflicted with auto-related OCD and in the end, I was too weak and just couldn't handle the asymmetry. Your location is probably a better deterrent to someone thinking about busting...

When you get your LED installed you'll be able to see when it shifts from the arming period to being armed. Nice, clean install!

Thanks for sharing the installation reference. It will be useful to a lot of folks. Looks like they now have a single guide for all models. I had leveraged one I found for a 2019 Ford Edge, which was essentially the same except for the GWM location. You can adjust the sensitivity setting as...

Those part numbers are correct. If you shop around the various Ford parts suppliers you can find some good discounts.

Obviously it depends on the sensitivity you set on the module, but I have no doubt it would set it off on my truck. No impact...and no programming required.

I successfully completed this mod and thought I'd share my DIY experience for anyone interested. As mentioned earlier in the thread, my 2021 Lariat came from the factory with the standard Perimeter Alarm (NOT the Perimeter Plus) but also came with the option Equipment Group 501A that included...

I suspected this was the correct path but wasn't certain. Thanks for the confirmation, much appreciated.

Almost looks like chew marks on the fuse box cover.

Almost but not quite. 413-01 shows how to remove the IPC bezel located behind the steering column upper shroud, but not the shroud itself.