Search results

Safe travels and try the mushrooms on the rez! They are delish!

You are either over driving the circuit and the BCM is disabling it or the BCM does not like you sharing the signal ground. You can try grounding to chassis rather than sharing the ground. Otherwise you are overdriving the circuit. These circuits that are controlled by the BCM are really...

Quick little shallow planter box from some left over WRC after making an Adirondack patio set for my sister last season. Been rainy for a few days so needed a quick indoor project. Need to finish sanding and apply my uncles oil/wax concoction.

Do the internal switches light up? Low power is sent from there to each relay. They should be blue (off) and amber (on). With the ignition in the "on" position and testing each switch you should get power on and off at each fuse. Check blown fuses. Check bad relay. If power activates and...

This came up for another Tremor owner. If you look at your manual there is a fuse panel underneath the engine compartment fuse box. Make sure the aux panel fuse is installed from the factory.

isn’t that a truck with a camper shell?

My closest neighbor is 20 acres away so a small sample pool. He does have a 43 F1 I keep trying to take off his hands. Last year I didn’t see a one around here. But I see at least one a day if I head into town now. Saw a nice black Tremor today, had the red sport stripes and looked pretty...

I’m not familiar with the kickers, but went with the Focal iS kit instead. But we’re the rings that were supplied the same thickness? On the Focals (and stock) the ring is a part of the speaker but the rears are noticeably thicker then the fronts.

This could be the wine talking but…. You could try economics with the wife. average price per lap dance is $20. Average song is 3:34. Let’s round up to 4:00 minutes for stage change. Just inform her it’s only 20 minutes worth of parts. but don’t under any circumstances mention inflation.

Welcome back Tracy. Who would have thought crooked parking can lead to jail time. “Stay in between the lines, or do time”

Just use caution sharing the signal ground. Always best to ground to chassis.

Thanks. He's a good boy. His coat will go through seasonal changes. He is much darker (more chocolate) in the winter. His summer coat will become much lighter. Amazed that after 5 months of being away in Phoenix he remembers all the treat spots in town. First trip to Ace he immediately ran...

New toy/tool got delivered today with brush grapple and brush mower. Time to break stuff! Got a wee bit of wood splitting to do first though.

I’d have to second peppermint oil. The RZR sits in the barn half the year and has never been touched. If I could spray down the entire barn I would. They make a mess of the insulation. Found one this year stuck in the shop vac, he got in but couldn’t get out. Can’t really fault them for...

Learned my best Navy language from my grandfather and great uncle during the Carter years.

Only thing these vans are missing are #metoo stickers. :LOL:

I think that answers the question if the BCM design utilizes low side current sensing. From a spec sheet from TI. The major disadvantage of low-side current sensing is that the voltage drop across the sense resistor appears as a difference between the supply ground and the load/ system ground...

@Elmosaurus very good points!

If you don't know the current rating of the fixture then you'll need to use a multimeter or other piece of equipment to test the amp draw. Once you know the amp draw then you just need to size the appropriate size constant current driver. All sorts of companies make constant current drivers...

You mentioned you have stock LED lights in the rear??? Keep in mind that LED's will have different current draws based on temperature. At cooler temperatures LED's will draw less current, but as things warm up they will draw more current. This is why constant current drivers are used to...