Ended up being a 5 minute fix.
Instead of taking the entire trim panel off as the instructions mention, you can easily pop the parking brake boot off by hand to access the bolt.
My bolt needed 3 full clockwise revolutions to get it within spec (brakes do not drag, parking brake holds car)
A...
Brakes were squealing like a virgin on prom night but when changing them this morning they still had over 50% life left.
Was hoping that would be the solution but it made no difference to the parking brake function. Will have a go at adjusting them from the instructions funinthesun posted
Has anyone adjusted their parking brake to make it grip tighter?
In neutral on a slight decline/incline the parking brake does not prevent my car from rolling. Would roll away if I didnāt apply brakes or put in park.
Unsure if it came like this or had gotten worse over 50k miles, but Iām just...
Check out almac boat loaders for inspiration. Iāve thought about DIYing something with some rollers on top of ladder racks, but until then Iām just rolling with an inflatable zodiac in the bed
D Fresh - all 255/80/17 forum searches lead to you ? Are you still on stock crash bars with no wheel spacers? Now that youāve had them for a few months any rubbing on or off-road? How is clearance with the upper control arms?
Does anyone know whether the āstart my carā shortcut has a 15 minute timeout like when you start it from FordPass app, or is it running indefinitely?
Also why stop at Siri Shortcuts⦠set up an automation to start when you leave work in the evening?
@Legalkill how are these D rings holding up, especially the ones near the tailgate using the swing box holes?
The owners manual gives a load rating for the 6 (or4) standard tie down points but nothing for these rear holes. I donāt particularly want to rip the D ring out of the threads the...