Airline tech thank you for your detailed response very informative.
Thought I’d post my experience.
As for the rubber hose I noticed mine ripped apart during routine maintenance (oil change). maybe 2 years after purchase around 30k miles (original owner). Glad I noticed when I did never knew a...
Both foam stock is larger reducing travel by an 1” to 1- 1/4”.
I re-installed the shims also. The entire job took about 1-2 hours I did have help from a buddy though. Might take a little longer alone.
Just came across this thread don’t think Apex auto lynx will work with our rangers. I emailed them earlier this year and asked if they would work with gen5 rangers they sent this picture saying they will bend.
I went with outlandishoverlander haven't installed them yet waiting to do them with...
All depends on how much weight you will have in your bed. I used all seven but I have a cap and RTT. And a lot of stuff in bed at all times.
Here’s the website for instructions in case you don’t have them. https://images.iconfigurators.app/pdf/I198520A_REVC_6183.pdf
It’s in Forscan I’m not sure exactly what module. But most likely it’s feedback from the fake engine noise. Turn that off and it should work better.
I had the same issue was able to get my stock struts out and springs off, but could not get the new springs on. They were too big. I ran Bilstein 5100 with Eibach springs
The Eibach springs were too big to compress had to take them to a shop to be put on a press. It was $40 for the pair (so-CAL...
There’s a module you can buy
https://redtek.com.au/ols/products/ford-ranger-mk2-mk3-auto-window-module
It works just don’t wash your truck if you have lariat door handles windows will go down.