Search results

Alright, I was finally able to get it unplugged and swapped. Went over to the other side and realized I was able to reach around the liner without undoing any clips to remove the bulb. Had a little difficulty getting it back in the fog light housing at first, just had to re-orient the bulb to...

Yeah, I got the bulb twist out of the housing, I just can't get it to release from the connector. Is the tab on the narrow side, or the blue tabs on the front and back? The video I saw on it shows the guy doing it one-handed, so I assume it's on the side?

So I double checked the skid plate, and it does definitely have more bolts holding it to the bumper (probably because it's plastic and would tear off otherwise if you hit something). That being said, I was able to get to the bulb by removing one of the liner pins and reaching behind it. Now for...

I’m at a loss here. Just went out to see if I could get into the fender liner to swap the bulb. Removed one of the pins and was able to pull out on the liner, but when I put my hand in there it still seems like the air dam or maybe the plastic guard behind the fog light is still in the way. I...

Yeah, it just seems like with the plastic skid plate and the way it’s attached it may be more difficult to remove that than the fender liner. It seems like once the fender liner is moved out of the way it shouldn’t be too difficult to get in there. I guess I’ll see how it goes tomorrow.

Thanks for the heads up on that, I probably would have just pulled them and broke them. This still seems like the easiest route to go to me.

Are they really that bad? I figured they would just pop out I’d be able to move the liner enough to reach the bulbs... Am I wrong?

I didn’t have my trim removal tools with me at work today, so I am going to give it a shot tomorrow. I feel like if I just remove 2-3 of them I should have plenty of room to get in there.

Installed the LED side marker lights, really like the way it looks. Got LED fog lights in the mail yesterday, but am having a hard time figuring out how to get them in there. Youtube shows being able to reach from underneath, but I think my arms are too short. Probably going to remove some of...

I just took a look at how the plastic "skid plate" on the FX2 is mounted, It may be a bit different than the FX4 skid plate. It looks like there are a few bolts between the bumper cover and the skid plate holding it on. I feel like I can probably get away with just removing a few of the...

Do you think that's easier than removing/ loosening the wheel well liner?

I just got LED bulbs for the fogs and have headlight bulbs coming tomorrow. I was trying to see if I could get at the fog lights, but the FX2 air dam is in the way. What's the best way to access these to do the bulb swap?

Installed my dash cam this morning. Mounted camera on passenger side of rearview mirror, routed wiring under headliner and was able to tuck it in between A-pillar cover and the bit of headliner that is beneath it. Then tucked it in weather stripping down to the footwell and across to the USB...

Joined the club, 2020 XLT. First truck, loving everything about it!