Search results

Hi! Very interested in this rack as well. Can you share any further photos that capture the full rack/truck in the photo? side and back view would be great to see! How do you like it?

I'd be interested in one if any are still around or another batch is made. Great idea!

Has this been a good modification long term?

I'm about to fit 285/70R17 on a 17x8.5" rim at 35mm offset with the Fox 2.0 level kit. That seems to be the sweet spot of stock-ish while providing solid gains. I'm assuming I may need to remove if not adjust my crash bars.

How are you calculating you MPG? With that big of a change, I'm almost thinking you are basing it on the old rolling diameter. If your odometer/speedometer is not recalibrated your vehicle thinks it's traveling less miles than it actually is because at the same speed your tires are rotating...

Something that seems to be missing in most of these discussions is that worst case for rubbing would likely be full shock compression with high steering angle input. The closer a rim is to the +55mm stock offset, the less likelyhood of rubbing, regardless of level kit or lift, as the lower...

What Tire size you running? Buying those same rims with 285/70R17 and trying to understand if I NEED to remove crash bars or simply loosen and retorque.

Drove around Davey Crockett National Forest and got stuck in a mud pit!

All US vehicles include an EVAP system and Exhaust components to meet CARB requirements. I've only seen Motorcycles lately that create CALI specific models with other US models that dont include EVAP cannisters, etc.

So did it fit?!

Blizzak DM-V2 Winter Tires on 17" Ford Ranger rims. 265/70R17, all with 5/16" or more of tread Only used one winter, at least two more winters left on these. Bolt pattern 6x5.5" Mounted and Balanced with TPMS sensors OEM Ford Ranger 17" cast aluminum Magnetic Appearance package rims. OEM on...

I rigged up a real basic and non-optimized wooden shelf for a Moab trip last year. Bolted into the three small hooked mounts that were behind the rear seat and tensioned down with paracord to the center mount. I ended up cutting thin rubber mats to cover the base of the floor. Held up well...

You can air down, the flex and wider contact patch is only in the contact with the ground.

Those rims and color combo look really good. I'd to do something similar but keep stock rims, so likely need 0.5" spacers. Can you help me understand the plastic you had to cut? Any pictures of the trimmings? Thanks

My front knuckles are black painted cast steel, are yours aluminum?

I had a similar clunk today after putting on my summer wheels set which is the Ranger Raptor rims. Turns out it was the inside pinch weights rubbing on the knuckle. Can't believe the tolerances were that close. I'm interested to see if the offset of this rim is different than the stickers.

I whipped together a single level platform this weekend for an upcoming trip to Moab where the bed will be taken up by a moto and bicycle. Should have plenty of room for camp gear inside now! Pretty simple construction using 2x2 and 2x1's and wood screws. I used three support legs and two...

Do you just live with the rear seatbelt fault message or did you find a way to remove it? I just removed my rear seats and seat belts but now every time I start the truck, I get a fault on the dash that I have to clear out and it sends me a text on my Ford sync phone account every time which is...