Search results

I’ll check again after work but I do remember something strange happened when I played with the fader

Seems like last night I actually lost sound up front when I faded front

Wonder why mine is not working?

Ok awesome . Please let me know what u find

I purchased same harnesses. Now I can’t hear Siri or voice assistant

I installed new speakers, added inline active converter and amplifier to my ranger. Now I can’t hear voice assistance or Siri. They hear me but I can’t hear them. What u think?

I’ll double check. I wonder where to but the right size pins to add to aftermarket harness if that’s the problem

I did add amp. Did you have any problems like I am? I’m concerned that running new wire from front door woofer to tweeter may have caused this. I can’t remember if Siri played on all speakers or just front tweeter

No harness is from radio to factory radio connector

Ok signal goes from radio to output converter then to amp then to speakers. I ran front speaker output from radio to the converter.

I also installed a line output converter to amplifier. The converter gets its signal from front speaker wires left and right and then amp output goes to front woofer in lower doors and off that woofer juice goes to crossover then to tweeter. I run new speaker cable from amp

Ok I have 2019 xlt with 8 inch non b&o system. I recently replaced door speakers, added a inline active converter, and used a harness adapter from Amazon so I wouldn’t have to cut Orem wiring. Now Siri and voice assistant can hear me but I can’t hear them. They respond to my commands and...

Thanks for going to trouble of researching. The company trucks don’t last long here. Neither do side by sides. I want my ranger to last at least 350,00. I got more than that out of my 2004 Nissan Frontier. I trust ford quality over Nissan. But the frontier never saw bauxite.

That S100 is definitely what I need.

Hello. I work at the nations only bauxite refinery. The bauxite dust is accumulating heavily on my 2019 ranger. I see bauxite in the ac vents, under the seat vents, and the engine is covered. I know this engine is turbo charged and I was wondering if I need to routinely clean parts of the...

Does anyone know if it is possible to set the truck hotspot to staying on for longer after engine is off? Turning ignition key on runs a lot of accessories. Is it possible to leave only hotspot on?

Ok thanks. I’ve never pulled a trailer any bigger than a welding machine and air compressor and now I’m fixing to pull a 5,000 lbs camper with a ranger. I’m kinda fretting about it.