Bludrok
Well-Known Member
- First Name
- Jason
- Joined
- Feb 4, 2021
- Threads
- 27
- Messages
- 553
- Reaction score
- 1,229
- Location
- Acampo, California
- Website
- www.ranger5g.com
- Vehicle(s)
- 2021 Ford Ranger Lariat Tremor
- Thread starter
- #1
I know the threads are 12x1.5, but what is the stock length and knurl? I'd like to get some that are roughly +10mm in length.
I got some 3" wheel spacers and did a test fit for rubbing, which was fine after removing the front crash bar, but the lugs do not have enough thread engagement. I get about 6.5 turns right now and it needs to be 8 or more. So now I am looking at getting longer studs, but cannot seem to find the correct info online.
Thanks
I got some 3" wheel spacers and did a test fit for rubbing, which was fine after removing the front crash bar, but the lugs do not have enough thread engagement. I get about 6.5 turns right now and it needs to be 8 or more. So now I am looking at getting longer studs, but cannot seem to find the correct info online.
Thanks
Sponsored