Ford Performance Bumper questions.

[RyanBoyd51]

I am looking at getting a FP front bumper by ARB as the drivers here on the west coast suck and it’s only a matter of time before I need it. The question is what is involved and what else would I need in install it? I have a ‘21 XLT 2wd that’s leveled. I did install front tow hooks and the required valence into the frt bumper for the hooks. I think the only thing would be a skid plate?
Thanks in advance.

Sponsored

 

[RyanBoyd51]

Any thoughts?

 

[LawnMM]

If you search here on the topic of Ford Performance Bumper you'll find a lot of topics. I don't know if any are going to get you a specific list of tools but that may be in the installation instructions for the bumper, and those are in those discussions.

You might start with the "Similar Threads" at the bottom of this posting you've created.

 

[RyanBoyd51]

If you search here on the topic of Ford Performance Bumper you'll find a lot of topics. I don't know if any are going to get you a specific list of tools but that may be in the installation instructions for the bumper, and those are in those discussions.

You might start with the "Similar Threads" at the bottom of this posting you've created.

I appreciate the response, I was trying to figure out any addition parts that might be needed. I have taken the bumper off a few times so that’s not too big of a worry.
Thanks

 

[LawnMM]

I'm not aware of anything else being required, plenty of things are optional. I've seen comments about the ARB skid plate needing modification for it to fit. I haven't seen anybody comment with regard to Ford plates like an FX4 skid plate. Given how much extra exposure you're giving the front end it's probably a good idea, but to my understanding not a requirement.

Sponsored