RangerRick15
Active Member
- First Name
- Rick
- Joined
- Dec 29, 2021
- Threads
- 4
- Messages
- 30
- Reaction score
- 31
- Location
- Northern Virginia
- Vehicle(s)
- 2020 Ranger XLT FX4 SuperCrew
- Occupation
- Operations
- Thread starter
- #1
$600 - Local pick up preferred.
Decked drawer system, with 2 boxes (one large, one small). About 2.5 years old. Great shape. Some scratches, but typical wear. With the locking tail gate, it was a great place to lock up tools while doing renovations, leaving plenty of room for cargo in the bed (wood, gravel, dirt, mulch, rented tools, etc.). Its already disassembled and ready to go. I did modify the drawers to accommodate wider boxes by shaving off the dividers - though the 4 dividers I have, 2 each drawer, still work.
With the Decked system, i was able to make quickly "drop in" racks that are supported between the decked system and the latch points. They work great for loading things like wood / plywood sheets over the tailgate, so the gate could be opened and closed, and drawers accessible without having to mess with the load overhanging. I made it for bike and it worked for everything else. And I also made a 2x4 and metal frame section rigged to be a rear ladder rack. I'd use pads on the roof for the cab. Worked out very well. I have both of those available if you want them - otherwise I'll scrap them.
Local pick up preferred.
Northern Virginia, DC, MD, MDW/NCR region.
Reason: Selling my Ranger, getting something with a 6' bed - can't convert this system to the other truck.
Decked drawer system, with 2 boxes (one large, one small). About 2.5 years old. Great shape. Some scratches, but typical wear. With the locking tail gate, it was a great place to lock up tools while doing renovations, leaving plenty of room for cargo in the bed (wood, gravel, dirt, mulch, rented tools, etc.). Its already disassembled and ready to go. I did modify the drawers to accommodate wider boxes by shaving off the dividers - though the 4 dividers I have, 2 each drawer, still work.
With the Decked system, i was able to make quickly "drop in" racks that are supported between the decked system and the latch points. They work great for loading things like wood / plywood sheets over the tailgate, so the gate could be opened and closed, and drawers accessible without having to mess with the load overhanging. I made it for bike and it worked for everything else. And I also made a 2x4 and metal frame section rigged to be a rear ladder rack. I'd use pads on the roof for the cab. Worked out very well. I have both of those available if you want them - otherwise I'll scrap them.
Local pick up preferred.
Northern Virginia, DC, MD, MDW/NCR region.
Reason: Selling my Ranger, getting something with a 6' bed - can't convert this system to the other truck.
Sponsored
