Search results

I'm not sure if we have fake engine sound, but we have noise cancelation to reduce noises at all, maybe you mean this

If you a little bit firm with Windows-OS and want to spend 20$ for a OBD dongle, you can do it with Forscan by yourself and some more gimmicks

Just a update. I was this weekend on the lifter again and measured some points. Axis mounts to brake discs, suspension mounts to frame, frame to bed. All numbers are good, just the bed to frame is little bit off. As long the truck is off the springs, the axle is proper aligned, as soon as the...

haha, in der Muttersprache ist es meist einfacher :) Danke für die Info, aber noch will ich mich damit nicht abfinden. y're right, you can write to me as usual :) Thanks for the info, but I don't want accept it yet. I will measure the rear axle at the next opportunity.

I'm pretty sure that it was not so off in the beginning, first after they the dealer solved my lean as I described in the beginning. And ... it is much more than 15mm, bit more than an inch I would guess

one reason for the different amount of remaining threads is the shim on the driver side, but you are right, at the passenger side they should be the all-around the same. I loosened and tightend the bolts the last time, I torqued the U-bolts in a crisscross pattern and didn't attention to the...

The gaps between cab and bed are almost the same, difference is just 2mm. But If I would align the bed, than it would be more worst than it is now. It seems the leafs are directly under the frame. I measured from the frame down to the leaf spring with a metal ruler. the left side is missing...

Can there be really assembly issues with a one leaf spring and a center bolt?

If I understood you right, you mean there are different slots in the axle. This is a picture from our rear axle (not mine but from a 2019 Ranger). There is only one center hole. The last time as I had loosened the leafs from axle, it looks all good, I tried to forced it in the right...

I bought it new, therefore I can exclude an accident, no offroad just some dirt roads, the rims are OEM and I already swapped it. What I can do is to measure from a certain bed position to the frame or to the break disc. Before I moved to Germany, I had the car at the dealer to fix the 'lean'...

I meant tension,

I have a problem with the center of my rear axle. The right tire sticks way more out than the left one. It's about a 1/2inch difference. I checked the alignment of the bed compared to the cab and the gap between cab and bed and it's almost fine. If i would move the bed to get the same gap, the...

I would say that the angles come from airbag or ESP control unit. The knob is only for selection.

Hey, I need help. I replaced my front flashers with switchbacks. I did some modifications with Forscan and it seems it works fine. Neither hyperflash in the dashboard or front flashers, but only if the light switch not on off. If I switch the head lights off and operate the flasher or hazard...

This could be my solution if I want only lights in the center console, but I thought if I know how the get out, to illuminate the cup holder as well. My plan is to abuse the tap in the power lines from the rear USBs.

Does anybody know how I can get into the center console? I mean how can I remove the insert? I want to add a light in this deep black hole, but I don't see any screws.

to blinking for a turn

Does anybody know if we can programming the front side markers as a flash light?

That's not right, the Tacoma provides 400 as well

I got it, it‘s not so easy than I thought. thx for responses