Install is done! Not too bad a job.
1) You have to pull the USB/120V outlet panel straight back. After squeezing the top. It has four of those white clips on the bottom.
2)Undo four 7mm hex head screws that bolt the armrest to the main center console(use a crescent wrench no room for a...
My truck is a pretty basic 2019 XLT with the Ebony Cloth interior, so this arm rest is the black fake leather/vinyl. Ive never sat in a full leather Ranger to know of that part is different honestly. See picture. No fancy decorative stitching, only cheap fake leather.
So I found an armrest replacement from Ford. KB3Z-2106024-AA (Black). For those who were wondering how to remove the old one here is how the part arrives from the factory so that shows how it will come off. The frame and mount is integral to the arm rest. Ill comment on my replacement when...
I just noticed my center console (arm rest whatever its called) "leather" is hanging off on the front r/h corner too. Looks like crap and I'm out of warranty ('19) so well see what the replacement part costs, then dig out the headliner adhesive?
Update:
Ok so my new EGR valve fixed the bucking and rough running problem about 90%. But last week I changed my intake air filter and I swear it helped the rough running in high gears at low RPM. My truck has 30,000 km on it. The old filter wasn't that bad, but for some reason it made a big...
Update:
Install of the new part is complete. (LB5Z-9J433-B)
Truck drives nice, seems way smoother. Im happy. The install for a non mechanic wasnt bad. Access to the old clamps is the hardest part, but once I got the smaller of the two off the rest was a breeze.
Yes thanks to the...
My 2019 with 29000km has this issue and my new EGR valve is here.
I have a stupid question though before I put it on: These hose clamps with the yellow/white plastic loop tabs? Are you supposed to remove the plastic thing to allow the clamp to fully tension or are you supposed to just leave...
Do you know where to find the official offset of the Rangers wheels? Not that I don't believe you(what i have found agrees), but im having trouble confirming it anywhere!
I just took it in yesterday. They agree that it doesn't sound right. They test drove 5 of the Rangers on their lot which all had the buzz, and concluded no fault found. "Must be characteristic of the engine'. But they admitted they were surprised to find it on all the trucks!
This video perfectly captures the "buzz" that hear from my truck too.
I have 5200 km (3200mi) on my truck and it isn't going away. Its definitely worse when cold. Ive got an appointment at the dealer to ask questions. It is definitely coming from the top of the engine by the injectors, the...
Ok....Figured it out, I had to open the panel under the steering column, which is hinged at the bottom and exposes the fuse panel. Once this panel is out of the way the LH finish panel popped off no problem.
The instructions say:
"Remove the finish panel to the lower left side of the HVAC...
Follow up, ok so I have an XLT 300A (the 4.2" LCD screen) and I confirmed that the left facia panel is an interference fit with the panel under the steering column. I broke a clip to figure it out. Has anyone with a XL or a XLT 300A get this thing installed? I'll have to have a chat with the...
Ok so I'm trying to install my Autostop eliminator and I can't get the stupid facia panels off! There feels like there is an interference fit with the panel directly under the steering column and the one of the little white trim clips fell out of the facia panel. Any tips? I don't want to...
How did the part work out?
My April '19 built truck came with only the 3 bumpers, but latching the seat is still a pain in the but. The dealer "wasn't worried about it" when i brought it up.... Even though they had to slam it so hard the back of the cab was bowing out.
Hello all, im really happy to have found this forum, reading fellow 5G owners issues has been really helpfull.
I picked up my 2019 XLT Supercrew on Saturday and i am wondering about a wierd noise the truck makes when you first open the door (with the engine off). Opening the door causes this...