I've been running the 91-93 perf tune for 40K now. Never a problem. I added the Banks Pedal Monster about 15K ago and that made it even better. I run it at City 4 and it makes the throttle response much crisper from idle. I do reinstall the tune every oil change 5K to clear the adaptation...
I did the exact same thing backing into my garage. The level of pissed off I had was off the charts. I dropped the headliner myself. Lots of clips just take your time. Disconnecting the visors was the worst. The only way to take out the headliner from the truck is to remove both front seats...
To all those guys that think they need to run the snot out of their truck to get it up to temp to check the level. I went for a easy 10 min drive around town before checking my fluid. I dropped a food thermometer in the hole to check fluid temp because I have nothing else to read temperature...
I bought the F-250 Tremor decal off Amazon. I then bought the FX4 decal as well. I cut the OFF ROAD piece from the FX4 and threw away the FX4 part. Used a laser level to level the truck and apply the decal level with the body. I don't think I spent more than $40 for everything. Great...
2021 Ford Ranger Tremor OE all terrain tires. General Grabber ATX 265/70R17. Truck was only a few months old before I took these off for a more aggressive tire. When new, tread is 16/32", now at 15/32" so maybe 3-4K miles when I took them off. Load range C and severe snow rated with 3 peak...
2021 Lariat. I've accomplished almost everything I wanted except 2. Mostly a novice with this program so I stay away from going into the "as built" stuff. 1: Navigation in motion, I want this turned off and can't figure how to do it. 2: Climate control on the right side of the instrument...
2021 Lariat with B&O. Truck is only 3 months old. Updates are current on truck and iPhone 13. Deleted phone and reconnected. I usually play iTunes for music through bluetooth, but when a call comes in, the music won't pause, the audio screen on the truck is disabled so I can't pause it there...
While you're in there, clean the rust off those hubs. I usually buy brass wire wheels for my drill and clean every mating surface to prevent imperfections every tire rotation. I use brass because it removes the corrosion and not the paint so much. If you use a stainless wire wheel, it will...
Am I too late? Procrastinated too long on buying my cable to make some general changes to my new Ranger with it. Now, I’m finding out that due to the Russian war, purchase of the extended license has been halted because of sanctions. Do I need the extended license to do general stuff on my...