Sponsored

Search results

  1. Pop/Clunk noise when turning wheel at a stop/low speed

    Yes! I realized that when my oil was changed the technician did not tighten my ARB UVP kit back to spec. This caused the middle part of my skid plate to be extremely loose. After tightening it to spec the noise is completely gone.

  2. Pop/Clunk noise when turning wheel at a stop/low speed

    OME suspension was installed in August 2023. Truck has been driven 3k miles since then. No offroad use before or after install. Total mileage on truck is 29.5k

  3. Pop/Clunk noise when turning wheel at a stop/low speed

    No kidding lol. Alright, I'll try this aswell on saturday and see if it can hopefully get rid of the noise. If you find that video please post it, that'd be awesome. Thank you!

  4. Pop/Clunk noise when turning wheel at a stop/low speed

    I can only hear this noise occuring when at a stop or at speeds around 5mph or less. I have had it inspected by 4wheelparts and my local ford dealership. Ford replaced the lower control arms and retorqued everything but the noise is still there. 4wp looked at it again yesterday and also...

  5. Pop/Clunk noise when turning wheel at a stop/low speed

    Ok, thank you. I'll have to try these suggestions on saturday to see if it fixes it. Thanks again!

  6. Pop/Clunk noise when turning wheel at a stop/low speed

    Hey everyone. I have a 2020 4WD STX ranger. Running 33s and have the old man emu front heavy suspension kit installed. Recently I started noticing an odd noise that sounds like its coming from the front drivers side under the vehicle. I attached a video, any information regarding this would be...





Top