Search results

Just want to mention that I was trying to change motor oil for my Ranger and the M1-212A filter does not fit. The thread hole is too large, it doesn't even touch the engine side threaded post and the filter goes all the way in and the rubber sealing ring touches the metal back wall. I have to...

I found a link to the latest owner manual which is version 3. http://www.fordservicecontent.com/Ford_Content/Catalog/owner_information/2019-Ford-Ranger-Owners-Manual-version-3_om_EN-US_04_2019.pdf On page 218 under the table for the 7 pin connector wire color and function there is a footnote...

srgredranger, I am just speculating here, could the no power to + pin on 7 pin connector be due to a missing fuse and/or relay? We checked the fuses on there and found no blown fuse. But could Ford have left the 12v line fuse/relay out? I know this is separate from your Redarc not working right...

I don't have a black/green stripe wire in my truck, I have a blue one which I connected to the Redarc blue one for 12v trailer brakes. The other three wires I have are the same as OP described, white for ground, yellow/red for 12v power and voilet/white for brake light trigger. So my connections...

srgredranger, on the Ranger owner manual page 235 it mentions the Power Distribution Box - Bottom, I believe that's where you checked the 3 fuses. I took out the box and checked all the fuses on the back side and all the relays and they are all good, no blown fuse and all perfectly working...

Need urgent help! I installed my Redarc last night and my checks looked good during the installation, the black and white wires of the 4 pin plug showed 12v power and the red and white wires showed voltage when I pressed the brake pedal. But after installation the knob LED didn't show any light...