OFC Ranger
Well-Known Member
- Thread starter
- #1
While this is currently installed on my 2023 ZR2 I know it fits the Ranger, cause it was installed on my 2019 prior to the Chevrolet. I live in the Augusta, GA area. I am willing to travel a reasonable distance. I can help transfer the setup, but if you happen to have access to a fork lift I imagine in can be over and done with in less than 30 minutes without having to break it down and build it back. I am prepping for the next stage of gear I am going to install (Tune Outdoor M1 canopy) so I will not have a use for this stuff any longer.
This setup is quite literally a one and done deal, everything one would need for sleeping, storage, etc etc. Only thing left is to stuff one's personal gear on-board and ready to go. Would be an ideal gift for someone just getting into the hobby or supplement your existing truck. The bed rack is universal, as it will expand in width with some bolt adjustments so not limited to Ranger or ZR2.
Setup Includes:
1.) RCI 58" x 18" Bed Rack. This also received a re-fresh in December of 2023 with a new powder coat job.
2.) RCI Bed Rack Tonneu Brackets. These give an extra 3" in height to help RTT clear cabin roof.
3.) RCI Awning Brackets
4.) RCI 56" Bed Rack Panels x4. These can go in place of the storage pods if one so desires, or used for other projects.
5.) ARB 2500x2500 Awning (well used, but good condition)
6.) ARB 2500x2500 Awning Tent (well used, but good condition)
7.) Custom 8-Pod Storage System. Made from 15 Series Extruded Aluminum and Plano heavy duty double walled storage boxes. Setup with camlocks (identically keyed) and gas struts.
8.) NatureNest Roof Top Tent
Unless you are ready to drill on the spot for install, you will need to have six J-clamps at the ready to secure it to your bed. Common type of bracket used for truck bed toppers and such.
This setup is quite literally a one and done deal, everything one would need for sleeping, storage, etc etc. Only thing left is to stuff one's personal gear on-board and ready to go. Would be an ideal gift for someone just getting into the hobby or supplement your existing truck. The bed rack is universal, as it will expand in width with some bolt adjustments so not limited to Ranger or ZR2.
Setup Includes:
1.) RCI 58" x 18" Bed Rack. This also received a re-fresh in December of 2023 with a new powder coat job.
2.) RCI Bed Rack Tonneu Brackets. These give an extra 3" in height to help RTT clear cabin roof.
3.) RCI Awning Brackets
4.) RCI 56" Bed Rack Panels x4. These can go in place of the storage pods if one so desires, or used for other projects.
5.) ARB 2500x2500 Awning (well used, but good condition)
6.) ARB 2500x2500 Awning Tent (well used, but good condition)
7.) Custom 8-Pod Storage System. Made from 15 Series Extruded Aluminum and Plano heavy duty double walled storage boxes. Setup with camlocks (identically keyed) and gas struts.
8.) NatureNest Roof Top Tent
Unless you are ready to drill on the spot for install, you will need to have six J-clamps at the ready to secure it to your bed. Common type of bracket used for truck bed toppers and such.
Sponsored
Last edited:
