Your quebec cousin's build ?

[litalien26]

Just to share with you the progress i will go on the Ranger
First thing was to keep stuff clean in the bed all season... Tonno pro low roll

Then i wanted to protect the side of the truck from rock... and decide to see in the futur and choose the XL Rokblockz for my flaps ?

And now i just got the tires for the futur lift kit...Motomaster Total Terrain AT/3 285/70R17...i love the OME lift but there's so much choices ?

Stay tune for my work in progress

Sponsored

 

[Qc_Gold]

Salut!

I got my kit ordered as well!

Pro Comp big tire kit
Tires 285/75R16 (32.8'')
Wheels : RSSW Heritage 16x7.5 ET23

Looking forward to seeing your build!

 

[litalien26]

Just order the eibach pro-truck lift kit, with the bds rear shackles 1 inch and the bds intrusion beams... can wait to receive everything and start the install ? I'm like a kid waiting for Christmas ?

 

[litalien26]

New addition...just found those for 400$can and i will be able to sell the tire 200$... i think it will be perfect with the 33s ?
6x139,7
20 offset
17x8
100mm core bore (will have to buy hub centric rings)

 

[Toytec]

What is the hub diameter on those?

 

[CB750F]

Salut mon ami. J'suis dans l'coin de Vaudreuil. Bonne chance avec tes mods

 

[litalien26]

What is the hub diameter on those?

100mm so it fit our 93.1... will only need a hub centric ring to be a perfect fit

 

[litalien26]

Salut mon ami. J'suis dans l'coin de Vaudreuil. Bonne chance avec tes mods

Je suis à Valleyfield donc tu vas peut-être me croiser ?

 

[Qc_Gold]

I installed my Pro Comp big tire kit this weekend. Big job! The crash bar took me a good 6 hrs to do and 6 Sawzall blades. The leveling went good on the driver side, I popped a CV on the passenger side even with the axle nut removed! What a pain, but all is back together now. Going for alignment this afternoon and waiting for my wheels...

 

[litalien26]

Just received the first of 2 parts that i need for the lift ? and clean the back of the wheels..

 

[litalien26]

2 full days alone from 9 to 5.. working on the truck...
Eibach pro truck lift and bds rear shackles
285/70R17
First of all: the cheap spring compressor for the eibach kit are a pain in the ass...after the first one done by myself..i decide to bring the second one in a shop..
Second the nissan wheel are a little bit to tight in front... when turning the wheel they scratch the caliper by like 1mm...so i decide to remove a little bit of metal from the caliper ?
tomorrow it's alignment time.

 

[litalien26]

First camping trip of the year with the new suspension... Even with mudflap, I think those tires will be rough on my paint ?? took a alternate road to get to the campsite and absolutely love the 2-3 + tires more inch of ground clearance ?

 

[MoldyTaco]

2 full days alone from 9 to 5.. working on the truck...
Eibach pro truck lift and bds rear shackles
285/70R17
First of all: the cheap spring compressor for the eibach kit are a pain in the ass...after the first one done by myself..i decide to bring the second one in a shop..
Second the nissan wheel are a little bit to tight in front... when turning the wheel they scratch the caliper by like 1mm...so i decide to remove a little bit of metal from the caliper ?
tomorrow it's alignment time.

Those Nissan wheels look nice. I considered the TRD wheels(below) before ordering the raptor wheels. I found replacement center caps that were all black.

 

[Qc_Gold]

2 full days alone from 9 to 5.. working on the truck...
Eibach pro truck lift and bds rear shackles
285/70R17
First of all: the cheap spring compressor for the eibach kit are a pain in the ass...after the first one done by myself..i decide to bring the second one in a shop..
Second the nissan wheel are a little bit to tight in front... when turning the wheel they scratch the caliper by like 1mm...so i decide to remove a little bit of metal from the caliper ?
tomorrow it's alignment time.

Good Job, looking good!

 

[TBR17]

Damn that look nice!!!! Great stance.

Sponsored