NeilP
Well-Known Member
- First Name
- Neil
- Joined
- Aug 28, 2022
- Threads
- 24
- Messages
- 473
- Reaction score
- 1,476
- Location
- Spearfish, South Dakota
- Vehicle(s)
- 2022 Ranger Tremor (SOLD 12-14-2023)
- Occupation
- RETIRED!
- Thread starter
- #1
Question for you guys that have installed the Leer HF650M. First off, the instructions are terrible at best!
Where exactly do you line up the rails in the front? Even with the corner joint between the bulkhead and the top rail or do you go all the way to the front edge of the bulkhead? Unlike some photos I've seen in other installation threads, the rails that came in my kit do not have a notch in the front. They are completely squared off.
Also where is one supposed to use the roll of butyl tape? There is no mention of it anywhere.
Thanks
Neil
Where exactly do you line up the rails in the front? Even with the corner joint between the bulkhead and the top rail or do you go all the way to the front edge of the bulkhead? Unlike some photos I've seen in other installation threads, the rails that came in my kit do not have a notch in the front. They are completely squared off.
Also where is one supposed to use the roll of butyl tape? There is no mention of it anywhere.
Thanks
Neil
Sponsored