All-new off-road products from Expedition One

[Expedition One]

Expedition One is excited to be apart of the Ranger5G community and with that some new products we are proud to unveil!

Based in northern Utah, Expedition One has been around for over 16 years fabricating bumpers, rocker guards, racks and off-road accessories.

We look forward to engaging with all of you!

Feel free to email us at [email protected] or by phone at 877.366.3099 Mon-Fri from 9am - 5pm

All Expedition One products are currently 15% off during our Holiday Sale Promotion as well as a $100 Shipping credit with promo code: HOLIDAY19 on orders over $499

2019+ Ford Ranger RangeMax Front Bumper - Store Link

Features

• Available with no hoop, single hoop or bull-bar wrap-around design (shown in photos)
• Approx weight: 120lbs
• Optional Filler & Front Skid Plate
• Optional Textured Black Powder Coating
• Fits most winches with non-integrated solenoid up to 10k
• Comprised of sturdy 3/16" steel inner structure & 1/8" thick outer skin
• Integrated winch mount
• Integrated 4.75" light ports
• Designed and made in the U.S.A

2019+ Ford Ranger Rear Bumper - Store Link

Features:

• Features our innovative latch system for easy, intuitive function of the swing arms
• Universally slotted tire arms for endless customization of accessories and gear
• Approx bumper weight: 175lbs
• Recommended max tire size: 33" to clear tail light visibility
• Integrated 1" thick 3/4 recovery shackle mounts
  
• Optional mount accessories: Hi-Lift mount, Nato-style can mount, Geri flat pack mount, and more
• Quick access to swing arm spindle/bearings for easy maintenance
• Comprised of 3/16" and 1/4" inner structure
• Optional Textured Black Powder Coating
  
• 100% Designed & Made in the U.S.A

2019+ Ford Ranger Mule Ultra Rack - Store Link

Features:

• Lightweight, aluminum construction
  
• Dynamic load capacity: 250lbs | Static load capacity: 500lbs
  
• Modular design
  
• Adjustable flooring design
  
• Fits up to a 40" led light bar
  
• Flexible tie-down points
  
• Some drilling required
  
• Form fitting around each vehicle application

2019+ Ford Ranger Rock Guards - Store Link

Features:

• Comprised of 3/16" and 1/8" sheet steel and 0.120" wall high strength tubing
• triangular boxed structure for maximum strength and efficiency
• Tubing is comprised of 2" x 0.120" wall for the inner and 1.5" x 0.120" outer wall tubing
• Steps with aluminum tread plates assist in entering and exiting the vehicle.
• Placed to maximize ground clearance
• Optional textured black powder coat

Advertisement

 

[coblueberryranger]

Whats your bed rack with that accesory panel? Is that on sale?

 

[Expedition One]

Whats your bed rack with that accesory panel? Is that on sale?

It's something we aren't ready to showcase in this thread just yet but we hope to have our new bed rack system available in the coming weeks

 

[coblueberryranger]

It's something we aren't ready to showcase in this thread just yet but we hope to have our new bed rack system available in the coming weeks

Nice! It looks pretty awesome. Those bed rack supports on your website will fit the ranger? just not your panel yet?

 

[Expedition One]

Nice! It looks pretty awesome. Those bed rack supports on your website will fit the ranger? just not your panel yet?

That is correct! Our Bed Rack tower system is technically available and compatible with the Ranger.

We need to finalize a few things with the panel mount system before its ready for prime time but should be available as an add-on in a few weeks time.

 

[MTB-BRUH]

Diggin that front bumper! I was looking at the Warn, do you have pics without the hoops?

 

[Expedition One]

Diggin that front bumper! I was looking at the Warn, do you have pics without the hoops?

We will certainly try!

We had to finish the bumper you see in the photos for the SEMA Show in Vegas a few weeks ago with the bull bar design so these are currently the only photos we have.

If you can visualize, it would simply be the bumper itself with no hoop design and the single hoop would be a short center hoop that goes about half way up the grille.

Example of center hoop from our GMC Canyon Bumper

 

[MTB-BRUH]

We will certainly try!

We had to finish the bumper you see in the photos for the SEMA Show in Vegas a few weeks ago with the bull bar design so these are currently the only photos we have.

If you can visualize, it would simply be the bumper itself with no hoop design and the single hoop would be a short center hoop that goes about half way up the grille.

Example of center hoop from our GMC Canyon Bumper

Cool appreciate the quick reply.. got some thinking to do

 

[Mmmmmnachos]

Do the rock guards attach to the frame? How much do they weigh?

 

[Andrew]

Love that rack! As for the sliders do those metal foot holdings also painted black? Looks a little cheesy with the different colors.

 

[treimche]

@Expedition One do you have any pics of your Ranger rear bumper but without the dual swing outs? Or is that not an option?

 

[Expedition One]

@Expedition One do you have any pics of your Ranger rear bumper but without the dual swing outs? Or is that not an option?

Hey there,

That is an option to get the bumper without the swing outs, but the only pictures we currently have is that one sorry. The only ones we have test-fit and produced have the swing-outs, and haven't received pictures back from customers with the base bumper (no swing outs).

We are running a promotion on our store right now! So if you want to get that bumper and then send us pictures that would be great.

email us at [email protected] if you have anymore questions

 

[Expedition One]

Love that rack! As for the sliders do those metal foot holdings also painted black? Looks a little cheesy with the different colors.

The treadplate is aluminum and comes that way, but it is possible to have it powdercoated.

 

[Expedition One]

Do the rock guards attach to the frame? How much do they weigh?

Yes they do attach to the frame.

Approx. weight is 120 lbs

 

[treimche]

Hey there,

That is an option to get the bumper without the swing outs, but the only pictures we currently have is that one sorry. The only ones we have test-fit and produced have the swing-outs, and haven't received pictures back from customers with the base bumper (no swing outs).

We are running a promotion on our store right now! So if you want to get that bumper and then send us pictures that would be great.

email us at [email protected] if you have anymore questions

No offense meant here, but there's no way I'd spend that kind of money on a bumper if I couldn't even see a picture of it on a vehicle before ordering. It shouldn't be up to customers to spend $1000 for a bumper and send you pics of it to put on your website. If you want to send me a bumper I'll gladly send you all the pics of it you can handle.