Sponsored

19.99 bore scope

Fordup

Well-Known Member
First Name
Ed
Joined
Jun 3, 2022
Threads
17
Messages
1,938
Reaction score
9,592
Location
NY
Website
youtube.com
Vehicle(s)
2022 Black Lariat Crew , 1966 Chevrolet Biscayne
Occupation
Retired YouTube Creator
Tried mine last night with the little screw on hook. Pulled those old Big Mac's right out. No 303 involved ?
1000002440.webp
Sponsored

 
OP
OP
seasprite

seasprite

Well-Known Member
Joined
Sep 1, 2022
Threads
25
Messages
468
Reaction score
1,111
Location
Missouri
Vehicle(s)
2022 Ranger XL STX
Changed my oil and transfer case oil yesterday and decided to get a couple pics with the camera.
I did try to look at my intake valves for cylinder 3 by removing the sensor next to the DPFE sensor and couldn't get it snake up to cylinder valves.

Did try to take look in the transfer case though the fill plug but there was some kinda plastic tube in the way and I already put the drain plug back on with the new crush washers.

IMG_0001.webp


Did take a look into cylinder 2 at the piston though. All I run for fuel is 91 alcohol free, and there is some carbon at edges. Might toss some cleaner in the gas tank and see if it cleans up. 35k on the truck.

IMG_0002.webp
 

AzScorpion

Moderator
First Name
Dave
Joined
Jul 25, 2019
Threads
335
Messages
26,272
Reaction score
132,320
Location
Back Home In AZ!
Vehicle(s)
2023 Ford Ranger Tremor
Occupation
Retired...Full Time Slacker
Changed my oil and transfer case oil yesterday and decided to get a couple pics with the camera.
I did try to look at my intake valves for cylinder 3 by removing the sensor next to the DPFE sensor and couldn't get it snake up to cylinder valves.

Did try to take look in the transfer case though the fill plug but there was some kinda plastic tube in the way and I already put the drain plug back on with the new crush washers.

IMG_0001.JPG


Did take a look into cylinder 2 at the piston though. All I run for fuel is 91 alcohol free, and there is some carbon at edges. Might toss some cleaner in the gas tank and see if it cleans up. 35k on the truck.

IMG_0002.JPG
Those pictures are really clear for a $20.00 scope. Nice score!
 

Grumpaw

Well-Known Member
First Name
Steve
Joined
Jul 1, 2021
Threads
84
Messages
5,861
Reaction score
29,205
Location
Fishersville, Va.
Vehicle(s)
Previous 2021 Ranger, Now 2019 Ford Expedition
Occupation
Navy Vet., Retired Police Sgt., Grumpy Old Senior Citizen
Played with the Bore Scope today.....
Took off a few of the rubber plugs I installed under the rocker panels over 2 years ago, and fed the scope up to check for any rust/moisture that might have accumulated, and found none. Also ran it up thru several of the holes in the frame rails and found them clean.
Very handy for checking....well worth the $20 bucks to check areas like those. :like:
Sponsored

 

Similar threads

 








Top