Search results

I believe that with stock a simple 1/4” space will work for you

Phil, where did you get your door handle cup protectors?

The rocker switch is not off, everything has been checked, fuse is fine etc. It's friggin mystery.....

For some reason I can’t get the ambient lights to come on. They were working and now nothing. I don’t recall changing anything in ForScan that would have cut them off. They worked last weekend and I have not made any changes in over a month. Tried resetting SYNC, nothing. Can’t figure it out and...

These are 18x8.5 with +30 offset. Tires are 285/65/18 They sit right at the wheel well and clear the steering knuckles by an inch I am running the Rangerlift.com 3” front spacer with Eibach pro truck shocks on the rear

⬆️ Yup exactly.... I have C load BFG’s and have no problems

yes, but not any off-roading that is too extreme. I have no rubbing at full articulation, and none at full compression. I clear my rear intrusion beams by 1/4” fully compressed

https://www.bluespringsfordparts.com/v-2019-ford-ranger--xl--2-3l-l4-gas/body--grille-and-components seems to be some sort of nut

I'm running 285/65/18's with +30mm offset and a 3" spacer/leveling kit. I had to swap out intrusion beams due to a full lock rub. I only had to do the fronts. +30 wheels clear the knuckles with 1" of space and set my wheels right at the fender lip. However I did add mud guards due to the trash...

total weight change for me with new wheels and tires was only +80 lbs ...negligible in my opinion and I really saw minimal mpg loss; 20lbs per is not much....

with the damper mod there would have been no thud.......

That price is for all he is selling. I bet I can get the grill for less. He's asking $337 USD for all of it. the design is a Ranger Raptor Grill. I can ask if you want and would be happy to ship it from my APO address.

saw this one today on the German eBay site. Tuning Zubehör Ford Ranger Wildtrak Kühlergrill usw. in Bayern - Weißenburg in Bayern | Tuning & Styling Anzeigen | eBay Kleinanzeigen (ebay-kleinanzeigen.de)

someone once said....Snow is like sex, you don't know how long it will last or how many inches you'll get.......

glad you got to sorted out....sucks that it happened, if you have to take it in again I'd take it somewhere else!

I only did my front beams....took me less than 30 mins. I had a slight rub in reverse with a full right lock.

I run 285/65/18's..... 285/75/16 is pretty much the same size. you'll need to either remove or replace the intrusion beams

no issues while backing up at full lock? I swapped my front intrusion bars to BDS as I had a very small rub on the front left, better safe than sorry. But I am using a +30 18" wheel, not the stock +55's. with the stock the 285/65/18's are very close to the knuckle, many are running a 1/4" spacer.

Yes I agree, it took me three months to make a final decision. I went with +30 wheels because I didn't want to use spacers to clear the knuckles, nor did I want too much wheel protruding. I used the offset calculator in there to determine what was going to be the best fit in my opinion. Two...

I'd suggest before you make that purchase you play in https://tiresize.com and check the offset calculator if you haven't already. It's a fantastic tool. Here’s mine: