Search results

I'd be lying if I said that the thoughts of a truck-BQ hadn't crossed my mind a time or two.

The evap drains just fine. Leave it idle for a couple minutes and it will develop a condensation puddle under the truck. On days it doesn't rain I can get in and start it up and no musty scent at all from the AC. When it rains I can go out after 20-30 minutes, open the door and I'm again...

One would think so. The dealerships went round and round could verify the mildew smell after it rained but could not locate the leak. The first/last dealership I took it to called the phone Engineers on multiple occasions and they suggested replacing the accumulator first off thinking that may...

It's a SCREWed Screw.

Probably not. Don't get me wrong it's a great truck and all but Just a little small for a family and then there's the fact that sieve's are better at keeping water out than mine is...

The mildew smell hits you as soon as you open the door when the truck and AC have been off. Same as the first time. The last time the main leak was the rear window. Water was running down the back wall under the seat and getting the jute liner wet. Because it has a rubberized backer it...

It took multiple trips to multiple dealerships, Contacting Ford Customer Care and nearly 9 months before they finally fixed this fricken thing. All the leaks (driver's door and rear window) were supposed to have been fixed. Several months went by since I got it back from the leak fix and...

Wait till you see the "Market Value Adjustment" dealer add-on price. Just a warning, don't be drinking anything when you see it.

A 1" spacer on stock 17's or 18's makes all the difference in stance/clearance especially when leveled. Looks so much better with them installed. I've had them installed on mine for two years now with no issues on stock 18's.

Nice setup. Unfortunately where my printer is at I don't have any option for exhaust like that so I'm stuck with PLA and PETG. If you have not done so yet, you might want to upgrade the hot end. The stock heatbreak on the S1 has a PTFE liner in it won't last too long printing nylon. I...

Get's and starts Ranger to back down the driveway 3 feet and doesn't fasten seatbelt. Seatbelt alarm instantly goes off...

It's the current trend on multiple vehicle lines. It's like they all got drunk and agreed to put massively oversized grills on. Toyota, Lexus, Hyundai, BMW, Audi, Mercedes, VW, Lincoln, Chevy, etc etc..

Mine is also at 16K has the same small seepage. Must be a minor issue. This will be fun later.. ?

Only to find out how to pull the door cards off. It's a pretty straight forward process and takes about 30-45 min per door. Pull the door cards, peel the backer off the sound mat sheet and press to the inside of the door skin. Then using the roller tool firmly roll over the entire mat so it is...

If you have not done so already, adding sound deadening mat to the doors makes a surprisingly significant improvement to the mid-bass output of the B&O system. Before doing this I felt the same that it just lacked a little bit on the low end, but after adding the mat in the doors and back wall...

This is a hidden feature on the Ranger that only wives seem to know how to activate.

I had a similar rattle coming from the sunglasses holder area. Pulled the panel assembly out and discovered that there both small screws had fallen out. The dome lights and sunglass holder assembly are held in the bezel with plastic clips. The bezel itself is screwed into a frame that is...

Best $40 I have ever spent was on one of these. https://accessories.ford.com/products/ranger-2019-2021-mcgard-tailgate-lock-1

There are locking hard covers that can be linked to the truck's locking system. My dad's truck had one. Sadly that's true. Back when we first moved in some 15 years back it was so quiet, nothing ever happened. On neighbor's night out the civic association president would host at their house...

Pretty much. Sucks too cause he's the nicest guy and best neighbor you could hope to have.