My father is 75, and he sold his boat this spring(before he told me he was going to) as in his words he is too old to bounce around on the lakes and rivers anymore.
he started building boats when he was 14. sunk more than a few he built, dove down to get his motors back, and then rebuilt the...
note the expensive lock holding it but no lock on the clips holding the balls themselves in place.
as a note I always remove mine. to many shin issues. but that is the only reason. Also my standard fixed hieght drop hitch, 2 different size balls and a a big ass wrench are in the swing case...
I have a pair of side view mirrors for XLt with the blind spot indicators. These are the mid range mirror.
$225 for the set or $100 each. I can ship anywhere in the continental 48 states, Canadians please message I can make arrangements for you too.
I manually turn my truck lights to ON while towing so that all my rear facing camera operates. haven't tried putting it into neutral and seeing if it comes on. but I don't like to fiddle with it once it is setup and turning the lights on lets me fiddle with everything still in park.
I would...
Partial Thread revival, I ended up with the swagman Bar this spring. First 100 miles round trip camping with one adult bike 3 kid bikes, and the camper. Worked well, and bonus swapping the one bar for my trifold soft cover is a quick 10 minute process by myself.
the above advice is all good. a tail gate extender. https://www.harborfreight.com/truck-bed-extender-69650.html
I also add strappable weight on the end in the bed. if they don't flex much it helps keeps things down.
I have a support structure for 8' and 10' boards. but 10' is a lot of...
I have driven around southern NH and have seen lots of rangers. even a couple of the forest Green, but I look for more Blue and a Soupie'd up Red Ranger.
only a few Blues.
Mine stands out with the mirror upgrade.
Agreed that is where mine is installed too. I also zeroed off the knob, and then marked the plastic at about the 8 oclock position and set zero on the dial there. I can look down and see what number i am at with a glance while driving, and easily make sure it is where it should be. Also...
Yep M8 by 1.25 thread size. is standard.
now there are 2 hole sizes in the bed. the hold downs are M8. the 3 holes on each side almost hidden by the tailgate are M6.
I have 2 of the above loops at the top front of the bed for easy reach hold down point as the actual tide downs are far to...
In April at work we had a company car inspected. it failed, had it fixed with epoxy had it fail again, then had the windshield replaced. it was a company car, but that was a painful week and a half for that salesman.
so when I took a rock chip the size of a quarter. I had it replaced.
And for those curious why the running lights are on, is I have tied one of these into the top dead center running light on the back of the trailer. Due to angle I only can see 20' or so right behind the trailer. however I can back right up to a tree or rock or house in that 20' no problem by...
First trip with Clearview mirrors. Damn they are nice. Ranger towed my box (that front is flat and barely angled). Short trip a mere 60 miles 13 mpg. 93 octane. Country roads so I hit 65 once going down a hill.
You have to play their game. once a year call and cancel , then be firm, and then give in.
my wife is paying $48 a year for just the music package. They try to upsell you. so you have to stick with what you actually want. and realize just music si the base base sub level. sports, talk radio...
Excellent I got OEM without asking.
I have full replacement windshield on my vehicles with a $50 copay. $0 just to fix the crack.
however NH is Cracking down on cracks in windshields and failing inspections because of them. even repaired cracks. if the inspector sees it it fails.
no where...