J0shM1lls' Ranger Build Thread!

[TheMarkP]

Hey josh nice to see you’re progress I live in South Bay too. New to the truck world but not to the modding world. Just bought my ranger and it’s getting delivered this week. Will be doing a sema build w it so it’s gonna get nutty. Lift wheels tires bumpers and camper are already here. But once I get the truck we should compare some notes

Sponsored

 

[kngolly]

Hey josh nice to see you’re progress I live in South Bay too. New to the truck world but not to the modding world. Just bought my ranger and it’s getting delivered this week. Will be doing a sema build w it so it’s gonna get nutty. Lift wheels tires bumpers and camper are already here. But once I get the truck we should compare some notes

You won't happen to have the stock FX4 bumpers for sale after your get the new bumpers on would you?

 

[TheMarkP]

You won't happen to have the stock FX4 bumpers for sale after your get the new bumpers on would you?

Not sure I want to give them up right away. But possibly. You looking to go back to stock or upgrade?

 

[kngolly]

Not sure I want to give them up right away. But possibly. You looking to go back to stock or upgrade?

Nah, I have just the regular Lariat front bumper, but I'm not sure if it will be a direct fit replacement, or if it's better for me to just look around for a good looking aftermarket upgrade. Just thinking out loud mainly.

 

[Msfitoy]

This close.

Would there be any problem when aired down?

 

[j0shm1lls]

Would there be any problem when aired down?

Its tough to say, but I think with enough of an air down and a little bounce, I'm 90% sure they'd rub.

 

[Mark]

This is the story of my RANGER and it's progress from 'stock' to 'not'.

"The Great White Buffalo"

First off, let's take a look at her specs as-ordered.

• 2019 Ford Ranger Lariat - SuperCrew 4x4
• Oxford White Exterior
• Ebony Leather Interior
• Equipment Group 501A
• 17" Magnetic Painted Aluminum Wheels
  
• FX4 Off-Road package
• Sport Appearance Package
• Trailer Tow Package

Order-to-Delivery Timeline

• 10/29/18 - Initial Special Order placed
• 11/12/18 - Dealer placed duplicate order as a 'Dealer Stock' order
• 11/15/18 - Received VIN for 'Dealer Stock' order, Scheduled to week of 01/28/19
• 12/07/18 - Scheduled to day 01/28/19
• 01/22/19 - Sent to plant
• 01/30/19 - Produced
• 01/31/19 - Released (Awaiting Shipment)
• 02/01/19 - In Transit (Shipped via Rail)
• 02/12/19 - Arrived at local rail shipping yard
• 02/15/19 - Offloaded rail car
• 02/16/19 - Arrived at Dealer
• 02/16/19 - Took Delivery

Rail Progress Map - courtesy of @rangerdanger

When we first met at Autonation Ford in Torrance, CA

Had 43 miles on the odometer, but was subject to a random road test after assembly

First Mod! 15% Llumar FormulaOne Pinnacle Window Tint

Top is the before, bottom after (obviously)

Second Mod! Bed coated with Line-X Premium!

Third Mod! Ranger Raptor Grill Installed! (with an added install video)

View attachment 4401

View attachment 4402
Fourth Mod! TVD Vinyl Decals installed on the tailgate.

I

Wonderful video ![/QUOTE

 

[Mark]

Wonderful video !

I can’t get the clips at the bottom of the stock grill to release. What is the trick?
Thanks,
Mark

 

[MotoWojo]

I can’t get the clips at the bottom of the stock grill to release. What is the trick?
Thanks,
Mark

I do not know if you have the 2 lower clips on the sides (1 each) released, but I had to unclip those first and then the bottom 2 were easy.

 

[Mark]

I do not know if you have the 2 lower clips on the sides (1 each) released, but I had to unclip those first and then the bottom 2 were easy.

I’ve tried wedging the stubby screw driver on the top side of the tab to release the catch. Is that the right move? Does the grill pull straight out? It looks like there may be a couple tabs along the bottom edge that may fit into the grill piece to hold in place?
Thanks

 

[MotoWojo]

I’ve tried wedging the stubby screw driver on the top side of the tab to release the catch. Is that the right move? Does the grill pull straight out? It looks like there may be a couple tabs along the bottom edge that may fit into the grill piece to hold in place?
Thanks

Yes, it pulls straight out. Do you have the 2 side clips released, they are near the bottom but on the SIDES. I do not believe they were covered in the video, but those 2 need to be released before the bottom ones, at least for me. I did have a light scratch on the top side of the bumper when I pulled mine out. Not bad, but you may want to put some masking tape down just below the bottom of the grill.

 

[Indy650]

is that the tricoat white? It is absolutely gorgeous! I got the hot pepper red but I like the white, magnetic, saber, and the blue. One of the hardest choices was the color. The other was forking out close to 50 g's for the fully loaded lariat. Its worth it though I'm in love.

 

[RngrRegmnt586]

Updated the first post with the Ranger's first mod!

FormulaOne Pinnacle Window Tint 15% all around.

Same spot I got my windows tinted at. Jeff always takes care of my cars/trucks. Greetings from Long Beach, CA!!

 

[j0shm1lls]

*dusts off his build thread*

So, my 3.5" BDS Lift Kit w/Fox rears just showed up, I'll be starting this tomorrow! Thanks @Stage3Motorsports Jason and Lou!

 

[sbacpo]

*dusts off his build thread*

So, my 3.5" BDS Lift Kit w/Fox rears just showed up, I'll be starting this tomorrow! Thanks @Stage3Motorsports Jason and Lou!

That's what I put on mine (with UCA's). I think you're going to like it a lot.

Sponsored