One Touch Open/ Close Window Module Interest Thread

[RCMUSTANG]

Did the install today, the auto up and down with the buttons works, but the remote functions do not. I can hear the stuff clicking in the door, so I know it's receiving the signal, just nothing happens after that. I believe you said mine was already rewired correct?

The remote function is working if they roll up and down. You messaged about 2 unlocks. The is no 2 unlock function. Check the instructions again.

Sponsored

 

[t4thfavor]

The remote function is working if they roll up and down. You messaged about 2 unlocks. The is no 2 unlock function. Check the instructions again.

I got it working, I'm sticking together the video now, I'll have it uploaded later today.

Thanks a bunch!

 

[tgRanger]

I got it working, I'm sticking together the video now, I'll have it uploaded later today.

Thanks a bunch!

Hopefully of the installation and where you mounted your module also. Glad you got it working.

 

[t4thfavor]

Hopefully of the installation and where you mounted your module also. Glad you got it working.

I did, It's basically double stick taped to the inboard side of the door card directly below where your forearm rests.

I'm not sure I showed the exact location on the video because my camera battery seems to be bad, so I had to tape the whole thing with it plugged in.

I didn't end up using my GoPro because the HD handycam has better audio and it's easier to see what I'm pointed at.


EDIT:We're at 20% folks... Yay 3rd world internet!

7 hours later, and we've made it to 56%

77% at 9:44PM EST... I gotta get better internet...


Aaaand it's up. Please forgive my lack of storage space, and terrible on-screen skills.

 

[skibuff]

I've had mine installed for a week now and everything works perfect.

 

[j0shm1lls]

@RCMUSTANG any idea how long before you order up a second batch? Thanks.

 

[RCMUSTANG]

@RCMUSTANG any idea how long before you order up a second batch? Thanks.

I'll get the last 5 squeezed in with a few of the replacement harnesses.

 

[j0shm1lls]

I'll get the last 5 squeezed in with a few of the replacement harnesses.

Awesome, so do you want me to send you the funds now or when they come in?

 

[RCMUSTANG]

Awesome, so do you want me to send you the funds now or when they come in?

I'll let you know if they can get it sent at the same time.

 

[DHMag]

Just another affirmation post. I installed the module this evening. The instructions are clear and easy to understand. I did mount the module in the recommended location, using zip ties to hold it to the door card, so it's in-between the card insulation and foam insulation to minimize vibration.

The module functions as it should. Auto up/down, vent, Auto up on lock, Auto down on triple unlock.

I'd upload a video but it's too large (that's what she said).

 

[t4thfavor]

Just another affirmation post. I installed the module this evening. The instructions are clear and easy to understand. I did mount the module in the recommended location, using zip ties to hold it to the door card, so it's in-between the card insulation and foam insulation to minimize vibration.

The module functions as it should. Auto up/down, vent, Auto up on lock, Auto down on triple unlock.

I'd upload a video but it's too large (that's what she said).

I'm still planning to upload a vid, but it's been raining nonstop here so I haven't so much as cracked a window since I installed the module.

 

[zendick]

I'd say it took me under 10 minutes to do the complete install. Have some RTV handy though to reseal the insulation you have to pull back around the lock, it may not want to restick.

I also placed my controller between door card padding and door foam insulation, not inside the door itself. Seems to be easier and less vibration with the BO radio.

 

[YouknowwhatImean]

Please report back if anyone else did a full install of the module and test the features.

I am having mixed results. Verified the correct taps were made with RC today.

I will be out of town/away from the Truck so I'd be interested in hearing someone else's results of a full install.

What I have verified to work:
single touch up/down on all windows.
unlock+unlock+unlock rolls all windows down (does not auto-roll them up, however)

Pretty much anything that involves being triggered by the locking/unlocking mechanism (the two t-taps) is acting wonky on my install.

Okay. Finally got to it work. Turns out my posi-taps were not experiencing full continuity.

Long story short, i had to strip ~.5 inch of wire from the module to feed into the posi-taps. And now it works.

I took some pics and details for those interested in the install:
https://www.ranger5g.com/forum/threads/window-module-install-detailed.3367/

 

[coblueberryranger]

Just installed this afternoon and verified all functionality is working as intended .

 

[DentonB]

Installed without issue.
Thanks

Sponsored