One Touch Open/ Close Window Module Interest Thread

[skibuff]

The 22 that have paid for shipping will be shipped this morning. I'd prefer to ship everything at once and save myself the extra trip but I don't want to hold up the majority. The rest will hopefully ship Monday if everyone else sends their payment.

Thank you and sorry you have to make a second trip.

Sponsored

 

[tgRanger]

Whoever lives in Sand Springs OK your item is out for delivery
9405503699300021790781

Anyone got a tracking for NJ?

After researching it looks like I have DentonB’s tracking.

 

[DentonB]

Whoever lives in Sand Springs OK your item is out for delivery
9405503699300021790781

Anyone got a tracking for Hawthorne NJ?

After researching it looks like I have DentonB’s tracking.

Yep, got the notice this morning! LOL

 

[RCMUSTANG]

I pm'd you the correct one.

 

[jeffe]

I just checked my tracking #, Denton's was delivered @ 10:35!

 

[Jrye22]

Got the Module took less then 5 minutes to install all buttons work except the passenger side front door works on driver just not passenger button
I did try the one touch reset as if I unhooked battery did not work

 

[RCMUSTANG]

Got the Module took less then 5 minutes to install all buttons work except the passenger side front door works on driver just not passenger button
I did try the one touch reset as if I unhooked battery did not work

Did you test all the other switches? I'm forwarding this to the vendor.

 

[RCMUSTANG]

Standby, there's a work around since these were for right hand drive.

 

[Jrye22]

Did you test all the other switches? I'm forwarding this to the vendor.

Standby, there's a work around since these were for right hand drive.

All other switches work perfect and I’ll always the work around or maybe mine is just a fluke gotta see if anyone else has it

 

[RCMUSTANG]

No. I guess I never tested the front passenger switch myself. It's doing the same. I figured it out. It's because the right hand drive already has auto up and down on the front right. Some wires will have to be switched around. If you can switch them yourselves do so. If you can't I will request replacement harnesses with the corrections done. I just swapped mine over and it works fine now.

 

[RCMUSTANG]

IMPORTANT UPDATE. Directions to swap wires due to right hand drive to left hand drive configuration. I have swapped the wires and everything functions as it should.

#1 Swap white FL up and white FR up.
#2 Swap red FL up and red FR up.
#3 Swap white FL down and white FR down.
#4 Swap red FL down and red FR down.

To release pins lift this tab up.

The release tab in the connector. Wire should pull out.

 

[coblueberryranger]

IMPORTANT UPDATE. Directions to swap wires due to right hand drive to left hand drive configuration.

#1 Swap white FL up and white FR up.
#2 Swap red FL up and red FR up.
#3 Swap white FL down and white FR down.
#4 Swap red FL down and red FR down.

To release pins lift this tab up.

The release tab in the connector. Wire should pull out.

Thanks for the detailed instructions on the flip! I'll make sure to do that before installing, when mine comes in tomorrow.

 

[skibuff]

Got mine thank you.

 

[RCMUSTANG]

Future orders will be corrected at the vendor. The final 5 I have yet to send I will open the boxes up and correct them myself. It's not that hard you just have to follow the directions and do them a pair at a time. The connectors can be a little stubborn but not that bad.

 

[skibuff]

IMPORTANT UPDATE. Directions to swap wires due to right hand drive to left hand drive configuration. I have swapped the wires and everything functions as it should.

#1 Swap white FL up and white FR up.
#2 Swap red FL up and red FR up.
#3 Swap white FL down and white FR down.
#4 Swap red FL down and red FR down.

To release pins lift this tab up.

The release tab in the connector. Wire should pull out.

Sorry I've tried everything I can think of and can't get the wires to release

I've pulled back the side tab and my pins won't come free.

Sponsored