Strokerduster
Well-Known Member
Home DepotI forgot to order the bolts and the part came in today. I am going to try to look for the bolts Strokerduster posted here. Where did you buy yours Strokerduster?
Sponsored
Home DepotI forgot to order the bolts and the part came in today. I am going to try to look for the bolts Strokerduster posted here. Where did you buy yours Strokerduster?
Thanks for this. My cover came in last week but dealer was back ordered on the hardware. Do you know the exact size of the studs so I can buy at local hardware store? ThanksThe cover and bolts was 94 bucks ... but I bitched enough that I got it down to 75 bucks which I’ve seen in the forums .. the studs go down with a 13 mm wrencnh .. tge nuts are 10 mm.. don’t try to not use oem parts the way it’s made it’s best to use oem.. you end up with 2 extras ..sell those here for a couple of bucks help the next person out .. that way they need only the cover
Yep...you can get the cover, but the hardware is nowhere to be found.....Price is coming down a lot for these.
$37.17
https://www.superdutydepot.com/p/Ford__/COVER/75174216/L1MZ6A949A.html
$32.76
https://parts.beechmontford.com/oem-parts/ford-cover-l1mz6a949a
$33.04 Villa Ford
https://parts.villaford.com/oem-parts/ford-cover-l1mz6a949a
Do a google search of the part number
L1MZ-6A949-A
In New Jersey, I paid $36.70 for the cover + $5.20 for the (2) nut and washer and $2.80 for a stud (not sure I need this stud, I see one on the egine block)Price is coming down a lot for these.
$37.17
https://www.superdutydepot.com/p/Ford__/COVER/75174216/L1MZ6A949A.html
$32.76
https://parts.beechmontford.com/oem-parts/ford-cover-l1mz6a949a
$33.04 Villa Ford
https://parts.villaford.com/oem-parts/ford-cover-l1mz6a949a
Do a google search of the part number
L1MZ-6A949-A
was thinking the same. I would think the RS cover would have the best chance of fittingI wonder if a FoRS, Explorer or Mustang cover would fit?
The location on the Mustang oil fill and dip stick look different when I compared. I think Mustang would have best chance being RWD.was thinking the same. I would think the RS cover would have the best chance of fitting
The location on the Mustang oil fill and dip stick look different when I compared. I think Mustang would have best chance being RWD.
Yeah, oil fill looks much further back on the Mustang.Not an expert either.
I was looking from this aftermarket Mustang cover for 2.3. Little different.
Agree. Every Ranger trim should have this included. Seems cheap not to.got mine today took longer to get the ratchets out than to install. just makes it look more complete.