What did you do to your Ranger today?

[LB'sTremor]

The right tool makes the job far far easier, and not having it sometimes makes the job impossible.

These cross over from the Ford tools recommended in the Ford Fox upgrade instructions

Amazon.com: Astro Tools 78912 Low Profile Ball Joint Separator, Black : Automotive

Amazon.com: OTC 7315A Universal Tie Rod End Remover : Automotive

Sponsored

 

[TopoRanger]

 

[Colo_Ranger]

Solid axle conversion?

 

[TopoRanger]

Solid axle conversion?

That is the plan!! 2008 F-250 Super Duty axles

 

[TJC]

These cross over from the Ford tools recommended in the Ford Fox upgrade instructions

Amazon.com: Astro Tools 78912 Low Profile Ball Joint Separator, Black : Automotive

Amazon.com: OTC 7315A Universal Tie Rod End Remover : Automotive

Thank you!

 

[Proverbs308]

I built a temporary tonneau cover.

 

[Colo_Ranger]

That is the plan!! 2008 F-250 Super Duty axles

I always thought a set of Jeep Rubicon axles would go under the truck nicely... gears, lockers, all set already - easily handle 37s.

 

[TopoRanger]

I always thought a set of Jeep Rubicon axles would go under the truck nicely... gears, lockers, all set already - easily handle 37s.

I may go the rubicon route with the transfer case if possible

 

[JoeDirt03]

Found someone selling brand new Tremor fender flares. $50 bucks! Couldn't pass up. I like how they match the wheels and bumpers. The black trim was so difficult to keep clean as well.

What is everyones opinion on wheel spacers? I'm thinking 1". I would get different wheels but I like the stock ones. Don't fix it if it's not broke, right? But I also want to be safe.

 

[cfhgarza]

Found someone selling brand new Tremor fender flares. $50 bucks! Couldn't pass up. I like how they match the wheels and bumpers. The black trim was so difficult to keep clean as well.

What is everyones opinion on wheel spacers? I'm thinking 1". I would get different wheels but I like the stock ones. Don't fix it if it's not broke, right? But I also want to be safe.

I had spacers on my Escape and they caused a slight vibration at highway speeds. I’m not saying all spacers will have problems but that was my experience with them

 

[Colo_Ranger]

Found someone selling brand new Tremor fender flares. $50 bucks! Couldn't pass up. I like how they match the wheels and bumpers. The black trim was so difficult to keep clean as well.

What is everyones opinion on wheel spacers? I'm thinking 1". I would get different wheels but I like the stock ones. Don't fix it if it's not broke, right? But I also want to be safe.

I’ve had 1” wheel spacers for 45000 miles without issue. I retorque them each time the wheels come off.

 

[RangerPNW]

currently in the middle of full interior sound deadening.

I want to tackle this but on my wife's Explorer ST... which would probably be twice as big of a job so i'm gonna put it off for awhile haha

 

[Colo_Ranger]

I want to tackle this but on my wife's Explorer ST... which would probably be twice as big of a job so i'm gonna put it off for awhile haha

I’ll admit, I put it off a long time but it wasn’t nearly as bad as I thought. About 15 hours of work from start to finish.

 

[JoeDirt03]

I’ve had 1” wheel spacers for 45000 miles without issue. I retorque them each time the wheels come off.

Which ones did you get?

 

[Colo_Ranger]

Which ones did you get?

I bought Faction Fab from Stage 3, but it appears they don't carry them anymore.

Sponsored