What did you do to your Ranger today?

[VTRanger]

Once you start drilling, it gets easier. ?

Maybe when it's paid off

Sponsored

 

[Colo_Ranger]

I adjusted my headlights down. I have no idea how to tell if they are right or not. I will have to drive it today and see how it is. I may have gone down too far. I did 26 movements of my ratchet.

 

[Jbroke]

I adjusted my headlights down. I have no idea how to tell if they are right or not. I will have to drive it today and see how it is. I may have gone down too far. I did 26 movements of my ratchet.

If you're unsure use this video for reference, makes it easier than guessing

 

[Colo_Ranger]

If you're unsure use this video for reference, makes it easier than guessing

That's an oddly informative video. I will do this when I have a wall 25 feet from me. Thanks!

 

[Jbroke]

That's an oddly informative video. I will do this when I have a wall 25 feet from me. Thanks!

No problem, its a little harder than it seems to find a wall on flat land with 25 feet of space lol

 

[BILKO]

Hey everyone I've been working on a factory looking 12V 20 amp socket for the bed that doesn't require cutting into the bed or splicing into wires. It also doesn't require any adapters. It uses a heavy duty socket and 14awg well insulated copper wire. It's a super simple install that only requires tightening one stainless steel bolt. The socket housing is also sprayed with truck bed liner. Below is a link to the listing I have on eBay. Check it out and message me if you have any questions. I'm also looking at selling the same setup with I long pigtail so you can run it to the battery or fuse box. Let me know if you are interested.

Look at this on eBay
https://www.ebay.com/itm/2019-2020-...=p2349624.m2548.l6249&mkrid=711-127632-2357-0

 

[Dr3wDrop]

If you're unsure use this video for reference, makes it easier than guessing

HID = 2" below tape mark
Halogen = at tape mark
LED = your going to blind someone anyway so who cares!

 

[9zero1790]

Hey everyone I've been working on a factory looking 12V 20 amp socket for the bed that doesn't require cutting into the bed or splicing into wires. It also doesn't require any adapters. It uses a heavy duty socket and 14awg well insulated copper wire. It's a super simple install that only requires tightening one stainless steel bolt. The socket housing is also sprayed with truck bed liner. Below is a link to the listing I have on eBay. Check it out and message me if you have any questions. I'm also looking at selling the same setup with I long pigtail so you can run it to the battery or fuse box. Let me know if you are interested.

Look at this on eBay
https://www.ebay.com/itm/2019-2020-...=p2349624.m2548.l6249&mkrid=711-127632-2357-0

that wouldnt fool me for factory, looks to well done. ive found some round and round with electrical tape on my ranger that was factory lol. nice work.

 

[BILKO]

that wouldnt fool me for factory, looks to well done. ive found some round and round with electrical tape on my ranger that was factory lol. nice work.

? that is true. Thanks.

 

[Aonarch]

Took the hoops off, then took the rails off.

I anyone wants to buy them, I'm in Woodstock, GA and the rails have 81 miles on them.

 

[9zero1790]

Took the hoops off, then took the rails off.

I anyone wants to buy them, I'm in Woodstock, GA and the rails have 81 miles on them.

do those go to the frame ? i like the way they look with out the hoops.

 

[Aonarch]

do those go to the frame ? i like the way they look with out the hoops.

No, they are body mounted with 6 bolts each side. Super easy to install or remove.

 

[ControlNode]

Went to drive thru window and noticed my auto up/down on the driver's windows stopped working, I'd guess as a result of the battery disconnect while the dealer did the TBC install. Luckly the training process is the same as my RS so I fixed that while in line.

 

[9zero1790]

No, they are body mounted with 6 bolts each side. Super easy to install or remove.

People say they are flimsy, but honestly they are not that flimsy. They'd be "ok" as minor rock sliders. I wouldn't go rock crawling with them, but they could take the occasional ding.

got it thank you

 

[Dr3wDrop]

HID = 2" below tape mark
Halogen = at tape mark
LED = your going to blind someone anyway so who cares!

In all seriousness, I used this video to adjust my headlights just now. Neglected to do that after my level lift.

So off the ground the center of the headlight is 43”. Parked 25’ from a wall and measured 41” up off the ground. Adjusting was easy. But I feel like the lights are aimed really high now? I had to adjust them about 10” up from whereI started.

Sponsored