Sponsored
What did you do to your Ranger today?
- Thread starter Hambone437
- Start date
- Watchers 638
TheDo114
Well-Known Member
Thank you!
It's the short backrack for the 2019+ ranger with the 50002 backrack wide top tonneau cover adapter. The tonneau cover is an Extang Trifecta ALX. Very happy with the whole setup so far.
TBR17
Well-Known Member
- Joined
- Jan 5, 2021
- Threads
- 15
- Messages
- 932
- Reaction score
- 2,532
- Location
- Murphy North Carolina
- Vehicle(s)
- '21 Ranger Tremor, '13 Vette Z16, '62 VW Beetle
Thank you for the details. Going to pull the trigger once I source here in the states.Thank you!
It's the short backrack for the 2019+ ranger with the 50002 backrack wide top tonneau cover adapter. The tonneau cover is an Extang Trifecta ALX. Very happy with the whole setup so far.
Stay warm up there. I spent lots of time in Montreal and Chateauguay in the winter months some years back and DAMN it gets cold!
TheDo114
Well-Known Member
You're not going to be dissapointed.
It's been between -30C and -40C for the past two weeks where I am and we still have a week left of it. Good thing the ranger came with the block heater
TBR17
Well-Known Member
- Joined
- Jan 5, 2021
- Threads
- 15
- Messages
- 932
- Reaction score
- 2,532
- Location
- Murphy North Carolina
- Vehicle(s)
- '21 Ranger Tremor, '13 Vette Z16, '62 VW Beetle
Dang that’s cold. We have some friends down here from northern Alberta and it was -38f when they left. I think the F/C evens out at that extreme cold. They drove down 4800km in some insane weather. He also has a Ranger.You're not going to be dissapointed.
It's been between -30C and -40C for the past two weeks where I am and we still have a week left of it. Good thing the ranger came with the block heater
Stronglight
Active Member
- First Name
- Rex
- Joined
- Jun 10, 2021
- Threads
- 5
- Messages
- 31
- Reaction score
- 47
- Location
- Los Angeles
- Vehicle(s)
- 21 Lariat FX4 Supercab, rear seat & decal delete
I missed an exit today after being distracted by accidentally turning on the max front defrost button and getting blasted with heat instead of lowering the temperature as intended. Fed up with the total lack of tactile features on the HVAC panel, I added these 3M rubber bumpers to the cold side of the temp adjustment rocker and the driver side seat heater control. Just ran for burgers and confirmed I can operate these features and others without looking. They look more subtle in real life than in this picture. Hopefully this will keep me less distracted and safer.
Last edited:
21VBRanger
Well-Known Member
- First Name
- Bo
- Joined
- Jun 24, 2021
- Threads
- 6
- Messages
- 85
- Reaction score
- 314
- Location
- Overland Park, KS
- Vehicle(s)
- 2021 Ranger Lariat Supercrew
Finally got my bed cap. Leer 100XL. Looks good.
Zeroedin
Well-Known Member
I think I bought it online from Lasco Ford’s parts dept.
It looks like they may still have a few matte black/textured ones left in stock. They sell it as a Ford OEM product, so any of the larger dealerships and forum sponsors may also have them in stock. It’s still made by AVS.
https://www.lascoautoparts.com/oem-parts/ford-hood-protector-aeroskin-black-textured-vkb3z16c900b
Lol, I wanted the little sticker for mine so I just reached out to AVS and they sent me a few.
Mods, if I’ve broken any rules by posting the link please let me know….and apologies in advance.
Last edited:
Ranger54
Well-Known Member
- First Name
- Ben
- Joined
- Jan 16, 2021
- Threads
- 27
- Messages
- 338
- Reaction score
- 1,466
- Location
- Northwest Arkansas
- Vehicle(s)
- 2020 Ford Ranger Lariat FX4
- Occupation
- Service advisor
New wheel day. No more white letter out tires. Better pics tomorrow. Had to rinse them off, they were ? on the former inside side.
OFC Ranger
Well-Known Member
World first Ranger Runway Lights!
The other set should be here for the other side tomorrow. These will be installed under the platform lip out of sight. Full RBG range, I can program multiple sections and patterns. Very stoked how well this is going to work out. It will be hooked to a wireless remote/outlet that I will keep in the truck so a simple press of the button when I arrive home and I am cleared for landing. HA!
The other set should be here for the other side tomorrow. These will be installed under the platform lip out of sight. Full RBG range, I can program multiple sections and patterns. Very stoked how well this is going to work out. It will be hooked to a wireless remote/outlet that I will keep in the truck so a simple press of the button when I arrive home and I am cleared for landing. HA!
OFC Ranger
Well-Known Member
Also got another small project done. Wanted to clean up how my additional running lights tied into the rack grid, so I got some dedicated boxes which also allow for some expandability as needed.
kpgreenwell
Well-Known Member
Thank you for the link
Zvedza
Well-Known Member
Kinda silly, but was trying to find a way to get the red accents back on my Tremor since i swapped out the grille, but i suck at trying to apply vinyl in the same location factory did. So instead I tried a new spot. Less prominent than the stock grille, but i figure less is more with red.
Side note, man i love Blue, i havent washed this poor truck in over a month and doesnt look nearly as bad as black would.
Side note, man i love Blue, i havent washed this poor truck in over a month and doesnt look nearly as bad as black would.
cburson
Well-Known Member
I think I like those hood stripes you have there. I've seen the middle stripe but where did you get the ones on the outside?Kinda silly, but was trying to find a way to get the red accents back on my Tremor since i swapped out the grille, but i suck at trying to apply vinyl in the same location factory did. So instead I tried a new spot. Less prominent than the stock grille, but i figure less is more with red.
Side note, man i love Blue, i havent washed this poor truck in over a month and doesnt look nearly as bad as black would.
Sponsored
