Trigger 6 fuse tap help

[DblStuffed]

Alright. So I’ve been at this for days now. I’m struggling to figure out what fuse to tap into with the yellow wire to an ignition activated fuse.
I cannot use #24 as that is a tap for my alpha Rex head lights. I wanted to do #29 (usb) but that sticks out too far so I can’t close fuse cover.
I do NOT want the fuse to constantly run hot. That is where my struggle is. Any ideas?

mans no. I don’t want to tap into fuse marker. Wire is too short and I’m not adding more wire. Too much hassle.
Any help appreciated

Sponsored

 

[pocket_geek]

I've found these work pretty well considering the limited space available: https://www.qualitymobilevideo.com/6230pt.html

 

[DblStuffed]

Thank you everyone that has landed some assistance! I actually found a solution last night and have everything up and running. I was able to tap in the fuse number 29 as it is an ignition on fuse. I tried many fuses but this one works perfect. The only thing I have to do is custom cut on the fuse box so that way the lid will close fully as that fuse tap sticks out a little bit past the lid. But that won’t be a hard problem as I am marking it off and will Dremel it out tonight. And then I’ll use the weather sealant around it so that way it’s still protected. Thank you again For all the help!

 

[daniel3507]

FYI- the yellow wire thing is optional. I have it tied into the battery so I can use it when the truck is turned off

 

[RangerCRF]

FYI- the yellow wire thing is optional. I have it tied into the battery so I can use it when the truck is turned off

Still no issues with it wired directly to the battery?

 

[Trigganometry]

Alright. So I’ve been at this for days now. I’m struggling to figure out what fuse to tap into with the yellow wire to an ignition activated fuse.
I cannot use #24 as that is a tap for my alpha Rex head lights. I wanted to do #29 (usb) but that sticks out too far so I can’t close fuse cover.
I do NOT want the fuse to constantly run hot. That is where my struggle is. Any ideas?

mans no. I don’t want to tap into fuse marker. Wire is too short and I’m not adding more wire. Too much hassle.
Any help appreciated

For an ignition source, I used fuse 35 an ignition on and open fuse slot to use.

 

[daniel3507]

Still no issues with it wired directly to the battery?

Zero issues!

Sponsored