Genuine Ford Parts, Accessories & Ford Performance

[Bt_ostate]

Wow, I wish Levittown was in my city!! Envious!!

Benny,

VKB3Z-99286A40-C... will this bed extender work with a bakflip x4 revolver or truxedo sentry ct tonneau cover. How much clearance does it have to each side. They said it needed 3" to clear the rails.

Sponsored

 

[the5Gmartian]

Hi Guys,

We are honored to join Ranger 5G as a sponsoring vendor and hope that we can become a valuable asset here!

A bit about us: We are an authorized Ford dealership located in Levittown, NY therefore we have access to all Genuine Ford Parts & Accessories. We are also a proud Ford Performance and Roush dealer as well!

All parts we sell are discounted well below retail + we have available discount codes for members here so please let us know how we can help!

Thank you,
Benny

Hello Benny, I am interested in a few FPP on your website, is this still applicable? Also, would I be able to get

Hi Guys,

We are honored to join Ranger 5G as a sponsoring vendor and hope that we can become a valuable asset here!

A bit about us: We are an authorized Ford dealership located in Levittown, NY therefore we have access to all Genuine Ford Parts & Accessories. We are also a proud Ford Performance and Roush dealer as well!

All parts we sell are discounted well below retail + we have available discount codes for members here so please let us know how we can help!

Thank you,
Benny

Hello Benny, I am interested in the FPP tune as well as the FPP Fox 2.0 level kit, is the additional discount still available? Also, does Levittown install these parts? Thank you!

 

[LevittownFordParts.com]

Benny,

VKB3Z-99286A40-C... will this bed extender work with a bakflip x4 revolver or truxedo sentry ct tonneau cover. How much clearance does it have to each side. They said it needed 3" to clear the rails.

Hi,
I am sorry we do not know but from our research AMP is the vendor and here are the installation instructions if it helps any https://www.amp-research.com/images/ePIM/original/AMPIS-74832.pdf

Please let me know if you have any questions.
Thanks,
-Benny

 

[LevittownFordParts.com]

Hello Benny, I am interested in a few FPP on your website, is this still applicable? Also, would I be able to get

Hello Benny, I am interested in the FPP tune as well as the FPP Fox 2.0 level kit, is the additional discount still available? Also, does Levittown install these parts? Thank you!

PM sent,

Thanks,
- Benny

 

[Bt_ostate]

Hi,
I am sorry we do not know but from our research AMP is the vendor and here are the installation instructions if it helps any https://www.amp-research.com/images/ePIM/original/AMPIS-74832.pdf

Please let me know if you have any questions.
Thanks,
-Benny

Ty

 

[P. A. Schilke]

Benny,

VKB3Z-99286A40-C... will this bed extender work with a bakflip x4 revolver or truxedo sentry ct tonneau cover. How much clearance does it have to each side. They said it needed 3" to clear the rails.

HI Bt_

I have this exact set up. A Revolver MX4 Bak tonneau and a Ford (AMP). bed extender...they are compatible... I got the Ford version of the bed extender as my purchasing dealer of my Ranger gave me a discount beyond buying the AMP version elsewhere and being a Ford Retiree, I wanted the Ford Logo. Install of the bed extender was super simple if you have a good pop rivet tool...Not a cheap one as it takes some effort. Had this setup for almost two years with no problems.

best,
Phil Schilke
Ranger Vehicle Engineering
Ford Motor Co. Retired

 

[HBird]

Hi Benny,

I'm looking for a few parts for cosmetic stuff and have a few questions. First I'm looking for an XLT Sport grille and have found that KB3Z8200E appears to be what I'm looking for, can you confirm? Second, I'd also like to get the slightly bigger fender flares that come with the Tremor package, but have no luck on finding the part numbers I need. Are those available to order separately? Thank you in advance!

 

[LevittownFordParts.com]

Hi Benny,

I'm looking for a few parts for cosmetic stuff and have a few questions. First I'm looking for an XLT Sport grille and have found that KB3Z8200E appears to be what I'm looking for, can you confirm? Second, I'd also like to get the slightly bigger fender flares that come with the Tremor package, but have no luck on finding the part numbers I need. Are those available to order separately? Thank you in advance!

Hi Hunter,

The Sport grille in Magnetic Gray can be found here
https://parts.levittownfordparts.com/oem-parts/ford-grille-kb3z8200e

As far as I can tell the Tremors have not been sold/delivered yet so I cannot pull any part info yet until this happens.

Please let me know if you have any questions.
Thanks,
-Benny

 

[jblc]

Hi Benny / Levittown,

I'm looking to order these items (backorder fine), is there any discount code still available for these?

RNGRSKDPLTKIT (Ford kb3z-5d032-B)
M-18954-RAB (Ford m-18954-rab)

Thanks

 

[Craig]

Hi Guys,

We are honored to join Ranger 5G as a sponsoring vendor and hope that we can become a valuable asset here!

A bit about us: We are an authorized Ford dealership located in Levittown, NY therefore we have access to all Genuine Ford Parts & Accessories. We are also a proud Ford Performance and Roush dealer as well!

All parts we sell are discounted well below retail + we have available discount codes for members here so please let us know how we can help!

Thank you,
Benny

Benny thanks for the offer, I have the sand interior looking for the hand grip on the drivers side. Seen the install for them from the Asian market. Do you have some contacts that can get some?

 

[Steve23]

Hey Benny,

Is RNGRSKDPLTKIT (FX front skid plate) still on back order?

Thanks

 

[LevittownFordParts.com]

Hi Benny / Levittown,

I'm looking to order these items (backorder fine), is there any discount code still available for these?

RNGRSKDPLTKIT (Ford kb3z-5d032-B)
M-18954-RAB (Ford m-18954-rab)

Thanks

Hi JB, PM sent

- Benny

 

[LevittownFordParts.com]

Benny thanks for the offer, I have the sand interior looking for the hand grip on the drivers side. Seen the install for them from the Asian market. Do you have some contacts that can get some?

Hi Craig,
Our parts data is restricted to US market vehicles and Ford will not provide us with support for export markets. If the part number pops up somewhere we can check availability but until then we cant really help with this one.

-Benny

 

[Craig]

Hi Craig,
Our parts data is restricted to US market vehicles and Ford will not provide us with support for export markets. If the part number pops up somewhere we can check availability but until then we cant really help with this one.

-Benny

You tube" fitting a grab handle PX ranger", Do you have any contact with some Aussie parts people? Is the 2019 Ranger designated a T6, I see that term used a lot?

 

[LevittownFordParts.com]

You tube" fitting a grab handle PX ranger", Do you have any contact with some Aussie parts people? Is the 2019 Ranger designated a T6, I see that term used a lot?

Negative, We're lucky enough to get accurate parts assistance for US cars through their very tedious system. They wont even look at an export VIN.

I was able to get as far as finding this VIN https://www.autotrader.com.au/car/11680120/ford/ranger/wa/rockingham/dual-cab and identifying the handle part # AB3Z-6131406-AB and it wont come up in Ford's system. Granted its the wrong color and we need the pillar trim too it looks like this is a dead end from the U.S side of things.

- Benny

Sponsored